There were or might be some on the bay, I will check my watch list- and the Lunsfords are not easy to find either- I have some tecnacrafts in the mean time
mikea96 wrote:So what rear tires were used on Cliff Letts truck and is that chassis gloss red or is it a neon red?
It is a Factory flour red tub and nose- and the rears are Pro-line RED Pro 90's ( I may have another set if you can't find them ) and it has the early towers, arms etc- depending on how accurate you want to be
Im just going to go gloss red and my truck is a virtually mint ealry version with thin arms and towers. I do need the pro 90's if you wanna get rid of them.
I'm rebuilding another 10T. The rear hubs are marked only with a 0 (zero) no L for left. Does the 0 designate zero degrees? Are they aftermarket (RPM)?
Also, the rear suspension mounts are marked with a 3 on each. 3 degrees?
I've only ever used...
Last post
hey dude bodys ready and i have your wanted laundry list nose hubs mounts you would be best changing the nose seems pointless to be so precise on the rear to have rebent nose :wink: will be home tonight.
I have a late model 10T with a 2.25 stealth. I think for the direction I am going a 2.6 would be a better option for me. Can I just change out the gears inside or do I have to buy a new trans? TIA
Last post
You might be able to fab something but it's far from a drop in. Best bet is to find a cheap T2 donor for the chassis, bulkhead, rear tower and trans. Swap over all your suspension and nose. There was one for around $30 on eBay just a few days ago (I...
I have an extra gold pan frame that I picked up last year for the parts, the person flat tracked raced the car - so he drilled holes all over the frame (he did it with a hand drill - Real Shi**y Job) So I picked up another frame for $15.00 off...
Last post
Dont think so but i could be wrong. They stock most bits at tower:
Thats most of your 10t transmission parts there :D
Then if you do the b4 topshaft/slipper conversion thats on here you'll have transmission parts to last you years :D
Lately I've developed (re-developed) a bit of a stadium truck fetish. My buddy and I had a pair of stadium trucks briefly when we were in college. I had a Losi LXT that I bought used with my high school graduation money, and not long after he bought...
Last post
This week I made a little bit of progress. I'm using the original chassis for now until I can find a better one. I want to find an earlier B stamp with only the offset holes, but for now, this one is going to suffice. It's pretty clean, and would be...
Thanks for this great forum, I know this has been answered before. I have tried the search and came up empty. In one of the early RC10 Manuals it states to OIL the Bushings in the tranny and rear end. What is a good modern oil to use during a...
Last post
gomachv, Thanks so much for your tip on the R/C Shop out in Oregon. I called them and got the last set of #6614 Idlers that they had. They are also looking for some other parts for me at this time. Thanks again!
Hi there! Long-time RCer, first time RC10talk poster!
I usually have a pretty large hangar of 6 or 7 RC's, but I voluntarily gave them all up to show my parents that I'm committed to doing better in college (I slipped a bit last semester). I still...
Last post
Rebuild kits should be available, I think the 1.02 shocks are used still on sc10's
Working on the cars has lead me to wonder what years do I have ? I bought it brand new in 91 I believe?? Came with ball bearing a black tub. Has the skinny front wheels also.. the other is a green tub..before I forget both have anodized shocks .....
Last post
Haha I had to reread it a few times to make sure as well! But alas...it was not edited :shock: 8)