1993 Brian Kinwald Replica (last update 12/12/2009)

Post by **kenooze** » Sun Jan 09, 2011 4:47 am

Nope, Unfortunely, I still waiting for the right clear shell. I already collected all the stickers, found the right race numbers...
I planed to recreate a mold but I had no sucess with the only guy able to provide me a used shell to duplicate it

So, we have to be patient

Post by **Charlie don't surf** » Sun Jan 09, 2011 12:37 pm

If you are going to make a new mold, then why not just take a non scooped shell, and make a cast mold, and add the scoop- it's really not that hard and it's what RCPS did anyway-

Post by **kenooze** » Sun Jan 09, 2011 1:00 pm

Sure that's what I plan to do.

But the scoop on the Mirage SS looks not similar to the Turbo Mirage.

And I want to be near than perfect...

Post by **Charlie don't surf** » Sun Jan 09, 2011 1:08 pm

kenooze wrote:Sure that's what I plan to do.

But the scoop on the Mirage SS looks not similar to the Turbo Mirage.

And I want to be near than perfect...

Sorry I have never seen the scooped version of the SS, only the Turbo Mirage-

Post by **kenooze** » Wed Jul 20, 2011 2:34 am

This project will be shortly down right now

Post by **Lonestar** » Wed Jul 20, 2011 3:56 am

Genial - bravo Cedric!

Paul

Post by **m_vice** » Wed Jul 20, 2011 9:10 pm

This is awesome stuff man.

Post by **aip47-2008** » Wed Jul 20, 2011 9:23 pm

"merveilleux" Cedric

Post by **jeromec** » Thu Jul 21, 2011 6:34 pm

Bien joué, Cédric !

Post by **Chamberlain** » Wed Nov 16, 2011 12:48 am

To give you a little insight to the one screw in the back of Brian's chassis. Cliff and Curtis bent the chassis behind the rear suspension mounts as close as possible to the motor to give the car more ground clearence at the back of the car to keep from catching the ruts. That's why the one screw.

Brian also ran machined #1 pistons with 30wt. The pistons were prototypes of the new ones and fit a little tighter and the holes were a hair smaller cause they were drilled and not molded.

Post by **adam lancia** » Wed Nov 16, 2011 8:56 am

I can hear the Kinwald-replica guys scurrying to tear apart their rear shocks and pulling apart the rear end to bend the chassis now...

Really cool info, I love that stuff!

Post by **Chamberlain** » Wed Nov 16, 2011 2:55 pm

I have a chassis from the '93 Worlds with the sticker glued and the chassis bent. As soon as I figure out how to post pics in here I will show them.

Post by **FasterLouder** » Fri Apr 27, 2012 9:19 pm

My good lord,what an absolutely epic post!

Another jaw dropping car from Cedric and some RC royalty checking in,too!

I'm gathering parts for the same build,this has been invaluable.

Post by **milkyd** » Wed Jun 27, 2012 10:00 am

agreed this is great!!!

Post by **R3W4RD** » Mon Jul 09, 2012 11:35 am

Are your rear wheels direct fits or u needed an 12 mm hexagonnal part ? :p

Thanks
P.S Nice car

RC10Talk - The Net's Largest Vintage R/C Community

1993 Brian Kinwald Replica (last update 12/12/2009)

Re: 1993 Brian Kinwald Replica (last update 12/12/2009)

Re: 1993 Brian Kinwald Replica (last update 12/12/2009)

Re: 1993 Brian Kinwald Replica (last update 12/12/2009)

Re: 1993 Brian Kinwald Replica (last update 12/12/2009)

Re: 1993 Brian Kinwald Replica (last update 12/12/2009)

Re: 1993 Brian Kinwald Replica (last update 12/12/2009)

Re: 1993 Brian Kinwald Replica (last update 12/12/2009)

Re: 1993 Brian Kinwald Replica (last update 12/12/2009)

Re: 1993 Brian Kinwald Replica (last update 12/12/2009)

Re: 1993 Brian Kinwald Replica (last update 12/12/2009)

Re: 1993 Brian Kinwald Replica (last update 12/12/2009)

Re: 1993 Brian Kinwald Replica (last update 12/12/2009)

Re: 1993 Brian Kinwald Replica (last update 12/12/2009)

Re: 1993 Brian Kinwald Replica (last update 12/12/2009)

Re: 1993 Brian Kinwald Replica (last update 12/12/2009)

Create an account or sign in to join the discussion

Create an account

Sign in

Who is online