KYOSHO Ultima in Asia

[jackultima]

Hi tsan

the same issue
there are two parts on the radio-plate nearby number 3 , picture below,



Ultima body will be so weak in this area,it will tear when I open the Ultima body frequently~

[jackultima]

are you tommilin?

not yet,but the magazine and pictures are come from brother tommilin.

Hi

you know Tommilin??!!
I usually call him "Tommi" instead! , he collects vintage RC cars over 200 !!! so cool!

[jackultima]

Chapter 2 : Drawing parts by myself





























Ultima Pro parts

[jackultima]

re-mark the Ultima Pro

[crusaderlyf]

good work! jack!
Is there any front and rear bulkhead you keep for yourself? very interesting!

[Hcp22]

I would love to se the front A-arms and bulkhead in aluminium, and of cause I would love to have a set for my next project!

[Mr. ED]

What are your plans with the cad models? Are you planning on getting those parts reproduced?
Thanks for the pictures of the prototype car. I wonder how the rear arms were different from the ones that made it into production, and why they changed the design. I had seen a vague picture of those rear arms before and their style is much more in line with the design of the front arms

[jackultima]

I would love to se the front A-arms and bulkhead in aluminium, and of cause I would love to have a set for my next project!

Hi

to reproduce front and rear bulkhead in aluminium is one of my Ultima project ~

[jackultima]

What are your plans with the cad models? Are you planning on getting those parts reproduced?
Thanks for the pictures of the prototype car. I wonder how the rear arms were different from the ones that made it into production, and why they changed the design. I had seen a vague picture of those rear arms before and their style is much more in line with the design of the front arms

Hi

I want to running Ultima ,but don't want to get any damage on the gold base plate on Ultima pro,so backup any parts what I can do~

[jackultima]

Chapter 3: parts by hand made


I have those simple tools only...................

just do it ...........




so ugly , and I consider about reproduce parts from CNC machine maybe......

[Lowgear]

How about getting the parts made through here: http://www.emachineshop.com
They ship internationally as well.

[jackultima]

How about getting the parts made through here: http://www.emachineshop.com
They ship internationally as well.

Hi

Good solution ,thank you

[Hcp22]

How about getting the parts made through here: http://www.emachineshop.com
They ship internationally as well.

That can’t be cheap! If you order 50 pieces I recon it’s affordable, but if you only order one (ore 2) piece of each part it will cost!
Do you have any experience of eMachineShop, regarding prices, quality etc.?

Edit:
I did some browsing on their web page, and I think one bulkhead will cost you around 200$

[Mr. ED]

It's been mentioned in a couple older threads: several parts of the duratrax ST-15 are direct replacements for the ultima. There's front bulkheads, purple anodised shocktowers, suspension arms, axle carriers, steeringknuckles, bumper ...
Even the purple anodised chassis could be made to work (and has the same outer shape as a pro)

[proffesso]

How about getting the parts made through here: http://www.emachineshop.com
They ship internationally as well.

That can’t be cheap! If you order 50 pieces I recon it’s affordable, but if you only order one (ore 2) piece of each part it will cost!
Do you have any experience of eMachineShop, regarding prices, quality etc.?

Edit:
I did some browsing on their web page, and I think one bulkhead will cost you around 200$

i'd love to know this too, I was getting my hopes up thinking I could get some parts done....but $200 for a bulkhead....hmmm