While I cleaned up a 10L chassis for another member I decided to build a little more on my 10L chassis. Don't know much about these things. The front suspension is from Raceco. I built that new from the bag. If anybody has more info on what it's built with then give out a shout.
Well from the looks of it you have an HPI Damper Post brace, and the rear Pod "Diffuser" is also more than likely from HPI. The Motor Mount is an optional Associated piece. The right Diff hub, may be a Technacraft item. The Damper Discs are Parma/PSE Teflon items. I am not sure, but I think if you scoot the servo back some you should be able to run the turnbuckles outside of the front suspension pieces. Other than that you are off to a great start.
I do not know much about the front end though. Rims need no Intro.
You know sho? I'm a little disappointed with your build! You have lowered your above spectacular standards.
First off, a new spur gear is about 4 bucks! And what's with the romantic lighting for the photos? I don't see any candles or rose petals on that granite counter!
ahh, caught the bug did ya. That's a nice looking car. I was going to ask about your tecnacraft wheels, but figured that if you had other 10Ls that they would be in use. And I am too cheap right now. I would feel obligated to do a Nissan car with them if I had them. Kinda glad I don't though, because I want to paint a Gulf themed car. Cant wait to see the hyperdrive rear damper!
I've been working on my 10L for the past week or so. I installed a Tecnacraft Aero-trac kit which allows you to mount the motor on either side so I used a Hyperdrive belt kit. . I also added tecnacraft hubs.
My new office is my garage where my 19 rc cars, 15 boats and 11 airplanes reside. So as I was working on an evaluation I looked up and noticed I have 2 10l’s from an rc club I started at school back in 2001 sitting dusty an desolate. So I take a...
Last post
All set to run one of the 10L’s. I go to the clean smooth parking lot with everything ready and the diff nut is bad. Oh well of course I do not have any spares.
Thanks to GoMachV, I was able to get started on a RC10L project I picked up on Ebay. I'm using the Factory Works lipo chassis, but had it cut in the natural fiberglass for that old school feel. Still waiting on the body and some odds and ends to...
I recently picked up a bronco body for a spare CC01 chassis I have. At first I was just going to make my own body mounts to adapt the body but in the end decided to just get the OEM mounts. I Had to get part of the body mounts from Japan and the...
I've had these thoughts swimming around my head for a couple of years. I've always wanted to combine a MIP 4-10 kit with a fully hopped up Rough Rider SRB chassis. I needed to do some R&D with parts to see if my idea would work. So before I start...
Last post
Blue and gold works so well... and that transmission is so mythical, this should clearly end in a BotY kind of final competition when done! :shock:
On Friday a shapeways package came with my Toykid Beach Buggy kit. Overall the pieces are very nice. The body will need some smoothing before painting it. The rest of the parts look like they are ready for primer and paint. Gonna have to...
Last post
I used a whole can of Rust-Oleum sandable primer gave up on that and then used 5 coats of 2K automotive filler primer and pounded it until it was running off the bottom. then sanded that smooth. sealed it sanded that smooth again and painted it....
Hey guys, first time posting here. I have come across my old RC stuff and would love to know if any of it is worth anything. I have a 1988 RC 10 gold tub, parts and original owners manual. I moved from off road to NASCAR style and built the RC 10L...
Last post
The rc10 would best be posted on the buggy forum and the rc10L is best posted in the onroad forum.
Well I am not familiar with these cars at all and I don't understnad what makes the cars different from one another. I just recently bought a 10L and the box says it is a 10L Super Speedway.
I have been looking at the Proline bodies and I really...
Last post
everything is 10lss. the car and both extra chassis'.
Just picked a new 10L up on ebay. Will need some work once it gets to me. Had a couple of questions. The wheels and donuts from windtunnel, are all the 4 bolt pattern compatible? Also, are there any rubber tires available for the 10l? Final...
Last post
Bring a blower to the track aka road because sand and foam tires do not make for a fun day. He will laugh until you blow by. Black dot rear foams are the ticket. Dual stage front foams are good for a little more life on asphalt.