Report: Vintage RC10 Florida Racing
- Ruffy
- Approved Member
- Posts: 875
- Joined: Mon Jan 11, 2010 6:49 pm
- Location: Orlando, Florida
- Been thanked: 45 times
Re: Report: Vintage RC10 Florida Racing
Thanks, I might just end up using the clear chassis tape they have currently available. It is replaceable if it starts to wear down too.
I saw some being used this weekend that is thin and crystal clear, and really want to try it now.
I can't wait for the Harris clan to come on here and share their weekend with everyone!
I saw some being used this weekend that is thin and crystal clear, and really want to try it now.
I can't wait for the Harris clan to come on here and share their weekend with everyone!
- m_vice
- Approved Member
- Posts: 1313
- Joined: Fri Feb 23, 2007 12:46 pm
- Location: Dallas, TX
- Been thanked: 1 time
Re: Report: Vintage RC10 Florida Racing
The Blue chassis looks awesome Ruffy. Cant wait to read the Harris report.
- JHarris
- Approved Member
- Posts: 526
- Joined: Sat Jan 16, 2010 11:17 am
- Location: Orlando, Florida
- Been thanked: 1 time
Re: Report: Vintage RC10 Florida Racing
Sorry for the delay. The track surface yesterday was a little wetter and looser than what we normally run on. As a result, I spent the day in the garage tearing my RC10 apart. There was just too much dirt in too many places for me to just clean it. The time had come for a complete tear down anyway. The blue car is torn apart now and the chassis was dropped off for re-anodizing. I also dropped off the nose tubes and shocks for chrome. In the interim I have started building another car. This one is also blue, but I had the chassis polished before it was anodized. This creates more of a powdercoat look.
As for the races yesterday: it was a great day! Jeremy ran his RC10 in the superstock class. In a race with 106 total entries and as Ruffy said, a "C" main in stock; it was great to see him put the car in the TQ position. During the main he made a couple mistakes and engaged in some driving that we later discussed, but in the end he took the win. The car works great and turned a ton of heads. We had a steady line of people visiting and taking pictures of the cars, including Ruffy's stunning box art replica. We also had the engineering skills of Ruffy in the pits wrenching on Jeremy's car. Needless to say, it worked!
2wd mod was also a treat with my oldest son in the TQ position and Jeremy also towards the top. At the end of the day it was Josh taking the win, Jeremy in second and I think Jason Ruona ended up third.
Florida racing is almost like racing in Ca. With a large number of factory guys like Ruona, JR Mitch, Paul Wynn and Ryan Eckert (just to name a few), you really have to be on the ball. The boys brought their A game!
My youngest ended up racing my RC10. After an oversight during the loading process left him without his B4, it was time to learn how to DRIVE a car. He actually liked the way the RC10 drove more than his B4.
I will add video shortly.
As for the races yesterday: it was a great day! Jeremy ran his RC10 in the superstock class. In a race with 106 total entries and as Ruffy said, a "C" main in stock; it was great to see him put the car in the TQ position. During the main he made a couple mistakes and engaged in some driving that we later discussed, but in the end he took the win. The car works great and turned a ton of heads. We had a steady line of people visiting and taking pictures of the cars, including Ruffy's stunning box art replica. We also had the engineering skills of Ruffy in the pits wrenching on Jeremy's car. Needless to say, it worked!
2wd mod was also a treat with my oldest son in the TQ position and Jeremy also towards the top. At the end of the day it was Josh taking the win, Jeremy in second and I think Jason Ruona ended up third.
Florida racing is almost like racing in Ca. With a large number of factory guys like Ruona, JR Mitch, Paul Wynn and Ryan Eckert (just to name a few), you really have to be on the ball. The boys brought their A game!
My youngest ended up racing my RC10. After an oversight during the loading process left him without his B4, it was time to learn how to DRIVE a car. He actually liked the way the RC10 drove more than his B4.
I will add video shortly.
- murphy3428
- Approved Member
- Posts: 579
- Joined: Mon Oct 06, 2008 11:19 am
- Been thanked: 1 time
Re: Report: Vintage RC10 Florida Racing
Sounds like it was a great day for the Harris team, this might change Associated's view on re issue of the rc10 tub
- JHarris
- Approved Member
- Posts: 526
- Joined: Sat Jan 16, 2010 11:17 am
- Location: Orlando, Florida
- Been thanked: 1 time
Re: Report: Vintage RC10 Florida Racing
It has changed several of the local racers view of the aluminum tub. There are a few that will be joining the Harris team by adding an RC10 to their racing stable. I just hope it doesn't drive the prices through the roof!
The positive side is that with the 3 cars I'm building for Jason Ruona, maybe we can get some other parts updated. I think a body will be a sure thing, but maybe some modern wheels could be a possibility. We didn't get much time to talk yesterday and I haven't mentioned it to him yet, so nobody needs to get worked up yet but; we did talk about the setup I use, what he currently has on his cars and the issues with each. I could see the wheels turning.....
The positive side is that with the 3 cars I'm building for Jason Ruona, maybe we can get some other parts updated. I think a body will be a sure thing, but maybe some modern wheels could be a possibility. We didn't get much time to talk yesterday and I haven't mentioned it to him yet, so nobody needs to get worked up yet but; we did talk about the setup I use, what he currently has on his cars and the issues with each. I could see the wheels turning.....
- murphy3428
- Approved Member
- Posts: 579
- Joined: Mon Oct 06, 2008 11:19 am
- Been thanked: 1 time
- JHarris
- Approved Member
- Posts: 526
- Joined: Sat Jan 16, 2010 11:17 am
- Location: Orlando, Florida
- Been thanked: 1 time
Re: Report: Vintage RC10 Florida Racing
No. The Pro Radiant was probably the first thing I put in the truck! I didn't race yesterday, but I did run the Radiant in practice before the races. I changed a few things that Mike Dunn suggested and it was a lot better, until.......murphy3428 wrote:So Jeff did you leave the Pro Radiant at home with the b4?
Anybody have a diff outdrive for a Pro Radiant they want to part with?
- ROH73
- Approved Member
- Posts: 623
- Joined: Sun Feb 10, 2008 12:07 am
- Location: State College, PA
- Has thanked: 2 times
- Been thanked: 19 times
Re: Report: Vintage RC10 Florida Racing
I was the one making the undertrays last Summer/Fall. Demand for them kinda died out, but I can whip up more and post in the BST if anyone's interested.fastang wrote:Someone was making the under trays not too long ago but the member slips my mind. They were nicely done too.murphy3428 wrote:Glad to be of assistance Ruffy, the chassis looks awesome can't wait to see it complete. With all of these sweet vintage rc10's now on the track Mrlexan needs to come up with a lexan underside protecter so to keep all the great work looking at its best
Robert
- murphy3428
- Approved Member
- Posts: 579
- Joined: Mon Oct 06, 2008 11:19 am
- Been thanked: 1 time
Re: Report: Vintage RC10 Florida Racing
Any pics of the undertrays?ROH73 wrote:I was the one making the undertrays last Summer/Fall. Demand for them kinda died out, but I can whip up more and post in the BST if anyone's interested.fastang wrote:Someone was making the under trays not too long ago but the member slips my mind. They were nicely done too.murphy3428 wrote:Glad to be of assistance Ruffy, the chassis looks awesome can't wait to see it complete. With all of these sweet vintage rc10's now on the track Mrlexan needs to come up with a lexan underside protecter so to keep all the great work looking at its best
Robert
Re: Report: Vintage RC10 Florida Racing
AH yes, Sorry Robert, I just couldn't remember! Must be getting old! I think they are a must for these guys and when they see them, Ruffy and the Harris boys, I think will want one or 3! Post pics again. I think with the recent racing these boys(men ) have been doing you might sell a few!ROH73 wrote:I was the one making the undertrays last Summer/Fall. Demand for them kinda died out, but I can whip up more and post in the BST if anyone's interested.fastang wrote:Someone was making the under trays not too long ago but the member slips my mind. They were nicely done too.murphy3428 wrote:Glad to be of assistance Ruffy, the chassis looks awesome can't wait to see it complete. With all of these sweet vintage rc10's now on the track Mrlexan needs to come up with a lexan underside protecter so to keep all the great work looking at its best
Robert
- Ruffy
- Approved Member
- Posts: 875
- Joined: Mon Jan 11, 2010 6:49 pm
- Location: Orlando, Florida
- Been thanked: 45 times
Re: Report: Vintage RC10 Florida Racing
Agreed, please post pics to see. The advantage the undertray has to the clear sticker is cleanup.
Re: Report: Vintage RC10 Florida Racing
The Jconcepts chassis tape suprised the heck out of me, I was afraid to pull it off cause of the cleanup. But it only left 2 or 3 small spots to clean up. I'd rather have an undertray for the convenience though, you can take it off as many times as you like and also cover up a rough bottom chassis with a painted undertray. Freddy used one of Robert's undertrays at last year's VONATS and I was impressed by the finish of it, quality piece!
Mark
Aaaaahhhh crap! I'm about to get passed by that orange truck!
Aaaaahhhh crap! I'm about to get passed by that orange truck!
- ROH73
- Approved Member
- Posts: 623
- Joined: Sun Feb 10, 2008 12:07 am
- Location: State College, PA
- Has thanked: 2 times
- Been thanked: 19 times
Re: Report: Vintage RC10 Florida Racing
Please see the BST for the undertray info. PM me if you have any questions or are interested in buying. I'm traveling for work Monday - Thursday this week, so if anyone wants to buy one, I won't be able to ship until the end of the week.
Regards,
Robert
Regards,
Robert
Re: Report: Vintage RC10 Florida Racing
Saturdays Jconcepts SuperCup was an awesome event all around. After running the first round of stock I came back to the pits only to find Ruffy wrenching on my car. After cornermarshalling, I, walked back and Ruffy starts asking me questions about how it was handling and giving me advice and spectator feedback on line choices on the track. For the second round, I had a diff that was smooth as butter and new front shock postion, O and a car that handled a ton better! I managed to TQ with some seconds to spare. After marshalling again I walk back and Ruffy was working his magic again! For the main I had some very little changes, new double d's, new groovy's, and relux wheels! With the minor changes and fresh tires the car was dialed! I would in no way shape or form brag on my driving in the main. With bobbles, mistakes, and just flat out stupid mistakes in traffic it wasn't my best performance but managed to sneak a W in there with a last lap pass. I owe the all the credit to Ruffy for wis magical wrench work that I greatly appreciate! O and I suppose my Dad for making one awesome 20 year old car! lol.
- Ruffy
- Approved Member
- Posts: 875
- Joined: Mon Jan 11, 2010 6:49 pm
- Location: Orlando, Florida
- Been thanked: 45 times
Re: Report: Vintage RC10 Florida Racing
Congrats Jeremy, and yes your father built you one heck of a beautiful, yet very mechanically sound, race machine!
We were both proud of all of you boys as we can see that the torch has been passed.
I hope you didn't mind me working on it as I just wanted you to be able to experience how great a car your dad had built for you. The old school RC10 is a fantastic car, and slowly but surely as we fine tune it and you get used to driving it, before long it will be in modified taking names as well.
Congrats on the driving clinic you gave in that 2nd round of qualifiers! It was nice to look around the track and see jaws wide open as the announcer told the crowd numerous times you were driving an antique vintage RC10 with an aluminum chassis!
I loved every minute of it.
As far as the mistakes in the main, as long as you take the experience, learn and apply corrective action as you continue to race, then it was well worth it! I have never seen a perfect error free race, but as long as we strive for it, thats the best anyone can ask for.
We were both proud of all of you boys as we can see that the torch has been passed.
I hope you didn't mind me working on it as I just wanted you to be able to experience how great a car your dad had built for you. The old school RC10 is a fantastic car, and slowly but surely as we fine tune it and you get used to driving it, before long it will be in modified taking names as well.
Congrats on the driving clinic you gave in that 2nd round of qualifiers! It was nice to look around the track and see jaws wide open as the announcer told the crowd numerous times you were driving an antique vintage RC10 with an aluminum chassis!
I loved every minute of it.
As far as the mistakes in the main, as long as you take the experience, learn and apply corrective action as you continue to race, then it was well worth it! I have never seen a perfect error free race, but as long as we strive for it, thats the best anyone can ask for.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 75 Replies
- 6511 Views
-
Last post by kyoshoracer77
-
- 5 Replies
- 882 Views
-
Last post by cougartoo
-
- 2 Replies
- 542 Views
-
Last post by RER40
-
- 12 Replies
- 1925 Views
-
Last post by MOmo
-
- 31 Replies
- 4641 Views
-
Last post by broodenburg
-
- 3 Replies
- 1398 Views
-
Last post by Sgt Craig
-
- 17 Replies
- 2182 Views
-
Last post by Vintagemishal
-
- 1 Replies
- 1408 Views
-
Last post by brn2fly
Who is online
Users browsing this forum: Ahrefs [Bot], Google [Bot], jaro and 59 guests