Black A stamped chassis!
- Lowgear
- Administrator
- Posts: 3964
- Joined: Tue Feb 07, 2006 1:00 pm
- Location: New England
- Has thanked: 78 times
- Been thanked: 613 times
Black A stamped chassis!
This is my black anodized A stamped chassis. From the research i've done Associated took old stock of their gold pans, drilled them for the Stealth, and then anodized them black and sold them as replacements. Theres also a problem with the finish on mine which i'm guessing is due to a poor anodizing job. I know its not just a gold pan somebody tried anodizing black because I bought it directly from Associated a number of years ago. I remember hearing that they were selling off the rest of their aluminum tub inventory and if you wanted one you better act quick. Well I did and this is what they sent me. It seems like they were in a hurry, messed up the anodizing, and then forgot to drill the holes for the Stealth. It was also packaged poorly. They put the nose plate and motor plate in bags with the tub but didn't tape or staple them shut. Consequently they slid out of the bags and over each other causing some superficial scratches.
Theres a post or two about this on here but they had no pictures or information. I didn't realize I had something like this until today when I was researching it before I put it up on eBay.
Better idea of the finish. Tops like this as well.
Theres a post or two about this on here but they had no pictures or information. I didn't realize I had something like this until today when I was researching it before I put it up on eBay.
Better idea of the finish. Tops like this as well.
- scr8p
- Administrator
- Posts: 16549
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 29 times
- Been thanked: 979 times
Re: Black A stamp chassis without Stealth holes
they didn't "forget" to drill the holes. that's an "A" stamped tub, which were six gear only. black ones are quite rare.
- scr8p
- Administrator
- Posts: 16549
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 29 times
- Been thanked: 979 times
Re: Black A stamp chassis without Stealth holes
i also have a feeling those parts will never make it to ebay now that you posted a pic of them here.
- Lowgear
- Administrator
- Posts: 3964
- Joined: Tue Feb 07, 2006 1:00 pm
- Location: New England
- Has thanked: 78 times
- Been thanked: 613 times
Re: Black A stamp chassis without Stealth holes
Heres a thread I found on here of another member that had one.
http://www.rc10talk.com/viewtopic.php?f=38&t=11766
LowClassCC on another forum.
http://www.oople.com/forums/showthread.php?t=35421
Mine came as replacement chassis with the US flag header card which i'm pretty sure was part number 6301. Unfortunately I don't have the card any longer.
So the A stamped tub's came black with and without Stealth holes? If the black ones had the holes the A was stamped over with a B?
See I thought all of the black A stamped ones had holes added for the Stealth. Thats why I said they must have forgotten to drill the holes for this one.
This is sort of confusing.
http://www.rc10talk.com/viewtopic.php?f=38&t=11766
LowClassCC on another forum.
http://www.oople.com/forums/showthread.php?t=35421
Mine came as replacement chassis with the US flag header card which i'm pretty sure was part number 6301. Unfortunately I don't have the card any longer.
So the A stamped tub's came black with and without Stealth holes? If the black ones had the holes the A was stamped over with a B?
See I thought all of the black A stamped ones had holes added for the Stealth. Thats why I said they must have forgotten to drill the holes for this one.
This is sort of confusing.
- scr8p
- Administrator
- Posts: 16549
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 29 times
- Been thanked: 979 times
Re: Black A stamp chassis without Stealth holes
A stamped tub weren't drilled for the stealth........ no matter what color they were. AB, B, and C stamped tubs were the only ones factory drilled for the stealth.
- Lowgear
- Administrator
- Posts: 3964
- Joined: Tue Feb 07, 2006 1:00 pm
- Location: New England
- Has thanked: 78 times
- Been thanked: 613 times
Re: Black A stamp chassis without Stealth holes
With that being said it looks they had them but must of not put them into production. Templeofspeed posted a picture of one in this thread that was used in a manual. http://www.rc10talk.com/viewtopic.php?f=36&t=11027
But to make a long story short I think I got it now.
But to make a long story short I think I got it now.
-
- Approved Member
- Posts: 1304
- Joined: Tue Dec 08, 2009 10:10 pm
- Location: seattle washington
Re: Black A stamp chassis without Stealth holes
I have one of those it came in my NIB DS camaro kit i was pretty pissed at the time you could see that someone had swaped them out in the past probably the hobby shop in hind sight having another new black stealth pan saved me from drilling that one
just picked up a mip trans of the bay so i will get to use it
just picked up a mip trans of the bay so i will get to use it
- Lowgear
- Administrator
- Posts: 3964
- Joined: Tue Feb 07, 2006 1:00 pm
- Location: New England
- Has thanked: 78 times
- Been thanked: 613 times
Re: Black A stamp chassis without Stealth holes
Didn't some of the Dual Sports also come with Worlds tubs?
You mean because they will be easy to sell? If I listed them on eBay though I could get some ridiculous price.scr8p wrote:i also have a feeling those parts will never make it to ebay now that you posted a pic of them here.
- scr8p
- Administrator
- Posts: 16549
- Joined: Tue Feb 07, 2006 9:46 pm
- Location: Northampton, PA
- Has thanked: 29 times
- Been thanked: 979 times
Re: Black A stamp chassis without Stealth holes
i just figured you'd get bombarded with pm's about buying them.
-
- Approved Member
- Posts: 1304
- Joined: Tue Dec 08, 2009 10:10 pm
- Location: seattle washington
Re: Black A stamp chassis without Stealth holes
DID YOU SAY "RIDICULOUS PRICE" AND "EBAY" IN THE SAME SENTENCE
-
- Approved Member
- Posts: 8921
- Joined: Tue Apr 08, 2008 2:44 pm
- Location: USA
- Been thanked: 8 times
Re: Black A stamp chassis without Stealth holes
Lowgear, YGPMscr8p wrote:i just figured you'd get bombarded with pm's about buying them.
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 3 Replies
- 775 Views
-
Last post by nvxwax
-
- 16 Replies
- 2450 Views
-
Last post by longboardnj
-
- 9 Replies
- 966 Views
-
Last post by Toasted Coastie
-
- 8 Replies
- 1478 Views
-
Last post by DJGonzo69
-
- 14 Replies
- 1385 Views
-
Last post by Charlie don't surf
-
- 1 Replies
- 625 Views
-
Last post by V12
-
- 2 Replies
- 448 Views
-
Last post by RCveteran
-
- 6 Replies
- 416 Views
-
Last post by jwscab
Who is online
Users browsing this forum: No registered users and 14 guests