Losi stock and RPM Arm lengths

[aconsola]

I figured I would make a new post to make it easier to find the info in the future.
as requested, here are some lengths of losi arms from center to center of the hinge pin.

Rear:
RPM 7355 Truck wide arms 3"
Losi H-arm 2 3/4"
Losi links and RPM 7300 Heavy duty links 2 23/32"
RPM 7305 wide truck links 3" (still in pack, hard to gauge center without pin in place)

Front
RPM 7340 standard and stock losi 2 17/32"
RPM wide 2 25/32" (don't know the part# as mine are used. They don't have "truck" molded in like the rear wide arms and links)

Hope this helps,
-Anthony

[scr8p]

the pair of rpm losi fronts i have are........................

7350 / JRX-T Wide Front Truck Arms - 2 3/4" center to center on the hinge pin, 3" total arm length.

[aconsola]

the pair of rpm losi fronts i have are........................

7350 / JRX-T Wide Front Truck Arms - 2 3/4" center to center on the hinge pin, 3" total arm length.

They are probably the same ones I have. do yours have "truck" molded in?
Seems strange that both the wide rear arms and links say truck but not my wide fronts.
-Anthony

[scr8p]

nope, they only say rpm.