got this from redscampi. along with another goldpan and red one. this one is a A stamp tub, i had built it up half way, decided to put on black andys a arms from another car. didnt like it so i built it up with all white nylon,and front wide track andy arms for the front. running a novack Esc and a some kind of rancy motor. has timing marks on it,and has a skull.tub was drilled for a stealth trans so i put in a stealth trans. still awaiting a maiden test run. will post pics of the 2 other car builds from redacampi.
yep its the same tub.took a while to get it the way i wanted it. now only if i had some decent bodies for these cars im building!
Is it possible to paint a goldpan? Mine is pretty beat up and a new coat of paint would be good for it, i just dont want all the paint to flake off it right after.
thanks
Last post
apparently soaking the anodized metal in drain-0 for 30 to 40 min will totally removed the colour :)
I think this is going to be a long term slow to build project. It was...
Last post
I realized that I am using a servo mounting on this car I hadn't seen anyone else use yet.
The servo is hot glued to the chassis. I put down a generous about of hit glue from a glue gun and place the servo about in the right place.
Then I used a...
Hey guys, I recently pulled my RC10 box down from the shelves for the first time in 20 years or so. It is the 6016 set with full bearings. I wasn't aware of the existence of stamps before now, but I don't see a stamp on the bottom in the place where...
Last post
I just made the switch to lipo. I thought about it last year but decided to use up my nimh and go for new this spring. Let me tell you, I know my nimh were old but they were even piles of s*** when new compared to the lipos. Runtime and power is...
I got a another goldpan the other day. I was happy with it untill I realized there was a hole in the side of the tub. :shock: I heard Jb Weild is the best to use to patch it, but then do I paint the tub or reanodize it? If so where do I send it to...
Last post
your best bet is to either live with the hole, or get it welded up. If you have it welded, you will need to have the tub refinished, the weldment will need to be 5356 alloy in order to be reanodized, or you can used 4043 and get it powdercoated....
What set of turnbuckles can i get from my lhs and modify if i have to with my dremel. Im tryin to not get em off ebay. And i only want 6 not all 8 i dont need the servo to bell crank and the 1 that connects the bellcrank together. Its about time i...
Last post
I got the set from tower and I had to chop the rear turnbuckles alot the fronts a little the center link was the only one to escape the dremel
Well...I was going to wait until I got home from being in the field to post pics of my goldpan I'm working on, but I found 2 pics on my laptop.
There are a few more things to be seen to, but I have most parts ready to replace when I get to it. I...
Last post
thanks!
I remember as a first year university student needing money for books and I had it at the local hobby shop for sale, it was a sad time. Of course I has too high of a price on it so it wouldn't sell :D