SMC Saddle Lipo

[scr8p]

i saw a good price (imo) on an smc saddle lipo to use in my yz10 at the nats. but, the jumper wire looks kinda short. does anyone have one of these packs, and a yz10? do they fit?

even a measurement of the jumper wire length would probably work.

[aconsola]

do you not own a soldering iron and some shrink-wrap?










Sorry, I've been trying to keep the mrlexan/building an RC10 comments down and can only keep the wisecracks bottled up for so long before something escapes

[scr8p]

do you not own a soldering iron and some shrink-wrap?

i know... i know. just lazy i guess.

Sorry, I've been trying to keep the mrlexan/building an RC10 comments down and can only keep the wisecracks bottled up for so long before something escapes

i gave him a break with that hornet he's putting together. but if his next build isn't an rc10, it's on like friggin' donkey kong!!!

[mrlexan]

Everyone continues to still be a comedian.... You should be happy Anthony, I have three Losis on the table. Yet another reason for some comments from someone.

[Konich]

They will almost drop right into a YZ10 870C. I run 4900 SMC's in my B44 and with a little modification they will slip right into the Yoke. First the jumper wire will have to face forward, then the motor side battery hold downs are almost a perfect fit but will have to be trimmed slightly to get the lipo's in between. Then the post will have to be raised @ 3/16" so the hold downs can hold the lipo's down.

I use diggity design battery trays and post in my B44 so you could retrofit those into a runner pretty easy.

If you want some pics let me know and I can get some up.