=09 vintage nats rigs=

[jsrracing]

check this ride i just got from brandon.( my first racing rc -around 20years ago)
i think i just got to race it
or get a tub and shelf it .
maybe need a trophy to go by it first .

[tecnica2001]

I agree with you 100%, you definitely need to race it.... and then retire it with a trophy next to it...

[aconsola]

Her is #3 of3. Same Jrx-2 chassis as last year with new electronics, tires and body.
Novak GTB with 17.5 motor.
SMC 3200 lipo
Spektrum rx and z-590 servo.
proline ribbed fronts and holeshot rears on AE b-4 wheelsf/r

That's a lot of wires in a small space, I'm not used to this brushless stuff yet.

This one will be along for the ride to see if we can turn some laps on the oval
The chassis is actually drilled for the 5-link setup but I simplified it with rpm rear arms. I think the shock towers are JG.

[markt311]

I had this one on the track tonight for the first time. Thanks to Brandon for the awesome paint. Now I just need to work out a few little bugs and get on the plane!! See everyone in about a month.

Edit: I forgot to list my running gear

Novak GTB LRP 17.5 75/26 gearing
Spektrum DX3S
Ace 1313 servo
Viper body and B4 wing
Proline Holeshot rears and Jconcepts Rounders front

Mark

[tecnica2001]

This one will be along for the ride to see if we can turn some laps on the oval
The chassis is actually drilled for the 5-link setup but I simplified it with rpm rear arms. I think the shock towers are JG.

Hey Anthony,

It's not 100 percent, but I think RCHR is going to get rid of the Oval, they're taking a vote right now among the Local racers. They're also taking Layout suggestions that is VONATs friendly, so we'll have a new layout soon.

[markt311]

This one will be along for the ride to see if we can turn some laps on the oval
The chassis is actually drilled for the 5-link setup but I simplified it with rpm rear arms. I think the shock towers are JG.

Hey Anthony,

It's not 100 percent, but I think RCHR is going to get rid of the Oval, they're taking a vote right now among the Local racers. They're also taking Layout suggestions that is VONATs friendly, so we'll have a new layout soon.

If you guys are going to change things up, do it soon so the track can get good and packed in!! I only have holeshots I hope you guys still have the dirt oval, I'm bringing the rc10DSworlds for some donuts on the oval

[tecnica2001]

I just got back from RCHR and raced the XX with Inside Jobs and JC Groovies, and it was hooking up perfect, I just need to dial some things up and it should be ready to take on the VONATs.

The 17.5 with the right gearing and battery, it's really a beast.

[reign79]

Her she is in her test stage im going to go head deep tomorrow into a tear down and rebuild. I have a nip 6160 body and wing i think i will use so it should be fun i will have to come up with some vintage paint layout. Any set up suggestions would be grately appreciated.

[markt311]

This is a great starting point for a setup

http://www.rc10talk.com/viewtopic.php?f=35&t=6600

[Brandon G]

A few pics of the Supershot. Still need to finish a few details like painting the lights and driver and applying the window net....

[Erich Reichert]

Nice dude! I can't believe you're not going to run the frog again!

[Brandon G]

But I am! My other 2 are on the bottom of the 2nd page...

[Erich Reichert]

what did you use for wheels that fit tamiya axels and 2.2 tires?

[Mark Westerfield]

I'll try to post some pictures of the new track layout tonight!

[Brandon G]

what did you use for wheels that fit tamiya axels and 2.2 tires?

Tamiya P/N's 53880 & 53881 for the wheels. Hex adapters too to make these work: 53056