RC10Talk - The Net's Largest Vintage R/C Community

A couple of factors came into play that caused the fires to become so deadly. A dry lightning storm came through and lit nearly 1/4 of the state on fire. Couple that with the current drought, hot dry winds from the center of the country and poof. It was the lowest monthly rainfall on record, hottest...

Looks fantastic, I always like your builds.

Having the rear cutout creates a vacuum under the car that keeps the rear tires planted. If there is no cutout, the car will have a tendency to lift at high speeds and possibly flip. It happened to me a few times until I cut out the panel. In general what do you thing the Terminal Velociti is befor...

Nice set up Kym, I wish my stuff was as organized as that.

Cool pit tip, first time I've seen that one.

It gets plugged into channel 2 and nothing goes in the battery slot. Make sure the white wire goes to the inside. You may have to get an exacto and slightly shave the bottom corners of the plug so it plugs in nice.

I would recommend F/B/R which is Forward, Brake and Reverse. Much easier on the gearbox and is quite a bit more drivable.

Back when stuff was real.

The other one that comes to mind is Old RC but I'm not sure he makes "copies"

Worth a shot....

They don't require a lot of maintenance for just bashing around. The three most critical things to oil/grease would be. 1.) Clean and oil bearing periodically 2.) Rebuild differential when it starts to get crunchy. (Stealth lube on diff balls, black grease on thrust bearing) Also make sure the slipp...

That's a pretty good effort, good job.

Awesome wheels !!

I can imagine the headaches of trying to coordinate different wheel designs, colors and wheel nuts.

Even though I'm not getting a set I still thank you.

Cheers

This would be a good kit to buy in my opinion, I can't see huge numbers of these being sold but once they are gone spiking in value.

I would definitely buy one if I was financially better off and our dollar wasn't so crap.

I like the Quaker State body and the MR2 body.

Hello and welcome.

If it were mine I would just clean up the motor wires, put a period set of dish wheels on it like the photo and put it on the shelf as is.