RC10Talk - The Net's Largest Vintage R/C Community

I translated this article from a german magazine, january 1992: In August 1991 Team Yokomo aimed to defend their world's title. They did so by finishing first and second, but not with their production Works cars, but with cars that were designed especially for this worlds track. It was forbidden to ...

This might be the first of the recent re-leases that I buy.

RichieRich wrote: ↑Fri Nov 08, 2024 1:52 pm This might be the first of the recent re-leases that I buy.

Same here.

And I hope the gold chassis stays.... I have plans.

german RC magazine February 1992 article

In mid August I stumbled across a Youtube clip called “Losi´91 Detroit Conversion Kit – First Track Test Day” published by Grand Prix 3D. After watching the clip a couple of times I emailed Andrew at GP3D and placed a pre order for at kit. I still remember taking the bus to the magazine store every ...

Hi all...adding this here because there are others already posted in this section...Daryl Lane gave this truck to me, his last personal truck, a few weeks before he passed in 2021. As such, I can see his touches throughout and it took me some time to get to working on it. As it currently sits, there...

https://live.staticflickr.com/65535/52481657152_344f840da0_z.jpg https://live.staticflickr.com/65535/52071972139_f039fe75b5_z.jpg https://live.staticflickr.com/65535/54146080057_cfe6d78576_z.jpg https://live.staticflickr.com/65535/54146928101_93de495679_z.jpg https://live.staticflickr.com/65535/541...

Thanks to Daryl's son Adam, who sent me some awesome blueprints, I was able to recreate the arms (rears are 2°) and gearbox that Chris used for the 89 Reedy race. The parts were originally machined by Chris by hand, and Daryl later decided to draw them to see about production. Apparently that just n...

Dragonpunch does it again! https://www.dragonpunchrc.com/product-page/team-losi-titanium-shock-shafts-2pk Sold in 0.6", 1.0" (comes with a 0.1" spacer for use with 0.9" applications) and 1.2" sizes and hardcoated in Ti64. Should be good for us who run our stuff and are runni...

Heres a trx3 manual. I haven't had a TCP, wasn't even sure if it was a new manual or just a supplement.

The November 1994 RCCarAction mag makes reference to a Traxxas GRT as a follow up to the Nitro Hawk. It is described as a prototype based on the SRT platform, and I assume that it eventually became the Nitro Rustler. I realize this was never a production vehicle, but do any other images exist? Has a...

This is one truck I would like to try and recreate one day.

Not much happening on this car at the moment.
Dug deep in my boxes and I think a Novak 410-M1c is about period correct.

I’ve had this original for a number of years, so finally made a start on stripping it down for a complete clean and rebuild. Will have to replace the rear gear case as it is broken where the shock tower attaches, other than that, all original parts will be used. I am going to replace the camber link...

As you can see there is a cylindrical part added on these RC10-parts, so you can use a setscrew to secure the hingepins. Very comfortable, no more lost E-clips. And it is very easy to make your own hingepins, no need to make a groove to seat a clip, just buy 1/8" steel rod from a hardware store...