RC10Talk - The Net's Largest Vintage R/C Community

It didn't look right with white wheels up front and chrome at the rear so I've taken the axles out of the Tamiya front hubs and turned them down to fit the Kyosho front bearings , I think it makes it look a bit tidier . While painting I was really nervous that it might not come out well or just look...

Well, stickers came out okay except for two things. I don't know how to spell rechargeable and the paper is way too glossy. Apparently, clear matte sticker paper is difficult to find, but I will come up with something.

Finished up the wiring on this one.

Picked up a Bolink Round Tracker a little while back just to add to the pan car collection. I picked the car up mainly because many of the nylon pieces are engraved with "minicars" which I believe was a Swedish brand bought out by Bolink, but the fact that the markings are still there peak...

Sorry not a build as its already done.

This car came about as when i bought the Futaba sticker sheet for the "'power under pressure"' sticker (see roof) for my Yokomo project i received two so needed another project Anyways here it is never going to be 100% but close.

My 2022 VONATS RC10 Team Car with: RPM Worlds Front End, RPM bumper Hand Dremeled front and rear carbon fiber shock towers NIX RPM Bandit rear arm conversion Airtronics 94737 Servo, Hobbywing XR10 Justock ESC, Trinity XFactor 17.5 motor JConcepts Octagon tires, JConcepts Mono Wheels, JConcepts Prote...

Some parts from a friend ( Didier aka juleo68 )





Jerome

You didn’t hear it from me,

PROCAT coming soon

https://circusrc.com/2022/10/schumacher-racing-procat-classic-re-release-1-10th-4wd-buggy/

I'm in too 😁 Here is my proto PHM 4wd, build few month ago. I used a yokomo yr4 m2 transmission, mounted as mid motor, and I build the other parts as the chassis, front arms and monoshock setup, rear suspension with trailing arms. I finally use yokomo drive shaft, wheels adapter, wheels and body (ho...

Just a relatively basic pan car build. Chassis is a Bolink Round Tracker. Little tribute to Awesome Bill!

Build: https://www.rc10talk.com/viewtopic.php?f=33&t=47720

Bolink: Doing quick-change things before quick-change was cool! :D Super happy to have found this Eliminator Enduro in great condition. I added the following period parts: - Novak T-4, NER-2x, NES-1A & Stutter Stopper - Trinity Slot Machine - PTI matched 1200 SCR's - Futaba FP-T2PD Magnum AM rad...

You are not authorised to read this forum.

I traveled to Del Mar in July of 1985 to attend the first 1/10 scale off road championships. I had a 35mm SLR camera and took 50+ pictures. Some good, some not so good. The pictures were on display in my hobby shop until I closed it in the early 90's. If you want to take a look I have them in an alb...

This was a pretty fun build all nib parts.

Remodelled the Holiday Buggy gears to fit 8x4x3 bearings , stock they just run naked on the 4mm shaft without even bushings , both gears now need a spacer as well now , I'll get a set pro printed next month to check the model then add them to my shop .