RC10Talk - The Net's Largest Vintage R/C Community

It must be real I saw it on the internet!

I wasn't sure if this went in yokomo or rc10 rere lol

Preorder link-
https://60years.associatedelectrics.com/9a9426257782dda826901b9782686c95/

This is an all original 1988 Kyosho Vanning 1/8th scale 4wd .21 Nitro buggy my brother and i restored. Amazing enough it had never been started and still hasn't do this day.

Resto thread here:https://rc10talk.com/viewtopic.php?t=45652

Whilst part of the world celebrates the ancient Chinese tradition of fireworks ( :P ), here in Downunderville we're having what was supposed to be a *record mild winter*, you know, due to Global Boiling and all that. So, here's a picture of Señor Pooch, taking in a zero degree morning earlier this w...

Let's go for it! Kyosho Fantom EP-4WD Ext Gold 60th Anniversary https://i.imgur.com/xft6GVs.jpg https://i.imgur.com/tGMI8KY.jpg 3D printed parts ( available here : https://cults3d.com/en/3d-model/game/fantom-ep-4wd-ext-accessories-for-chassis ) Chain Guide and battery support PETG printed Bumper and...

Alright I built the shocks but realized I didn't have any good 4/40 hardware for installing them, so i ordered some.

RC10T time! I never had this when I was younger, so it was fun to build. The toughest part was masking off the roll bar parts on the back for painting. Went with a brushless setup, Flysky receiver, Hobbywing ESC. Paint pattern is the same as box art, but I went with different colors. rc10t_01_small....

I'll throw in one of my Blitzers. This one is a mix of original and re-re parts. - The only mods are Am-Pro upper and lower chassis braces, flipped steering blocks, and HD servo saver. I also used longer ball cups on the steering for more thread engagement (a problem with the re-re rods). - Electron...

Silverpan built for Silvercan. Electronics: Novak GT7 ESC, Core RC Core21 silvercan, Spektrum S6040 Servo, Blue MX Rx Made some custom 12mm hexes for the rear and used 5/16 bearings in the front to adapter to some Turbo Scorpion rere wheels. Full bearings and just replaced the steering linkage with ...

RC10 Tekin mid motor conversion This car was pieced together around the tekin conversion kit from parts I had with the intention of making a light runner around the mid-2000's. A used, trimmed buggy nose plate, old a&l steering bellcrank, and mix and match of new and used buggy parts. Custom hom...

Trimmed the chassis profile and countersunk the holes, for some reason the countersink I was using wasn't playing the game in the drill press so the countersinks aren't as nice as I would have liked. All in all it turned out pretty good at the end of the day. I could finish the chassis face a bit ni...

Did some testing and tuning the other day at World of RC with the RC10T Classic. I didn’t break any “real” parts, only two of the stock ballcups. Honestly if you’re going to run this truck it isn’t even worth it to take the stock ball cups out of the bag. They’re brittle, grip the turnbuckle far too...

Tamiya TT-02 Alfa Romeo Martini

I still have nightmares from cutting all those decals.

I installed the shocks and have front and rear black springs to install. I need to add an internal limiter to the rear shocks. I have ordered the correct front tires and now need to find some tr31 rear tires.

Found this cute little fella near the driveway today.

my 10yo son and his wild one we built together over several weekends..