RC10Talk - The Net's Largest Vintage R/C Community

Charlie don't surf wrote: ↑Sun Jan 26, 2025 2:57 pm My eraser tool worked to remove the pixilation

Holy crap, that's an awesome eraser tool!

And another…

My recently rebuilt JRX Pro SE I've been running in the Silvercan class. JRX-ProSE-ls.jpg IMG_20250205_191601121_HDR.jpg My first hobby grade rc was this same model, granted not this exact car seen here, as that was long sold off in the 90s. This car came to me as a complete basket case but has sinc...

Roostpalo.png Dig out your big pins and ribs and come join us for vintage race on a loose dirt track. A lot of people have been asking for a race on this kind of surface, and we were in a position to make it happen before the normal hard packed layout goes in for the season. Rules: 2wd - 1997 cutof...

Another beautiful set of purple XXT rods. I plan to eventually build a purple XXT truck around them.

This little ripper for my son. I may need to give it a go myself. Believe it or not, I severely fractured my coccyx on one of those for my son. And I raced MX for years! had a little two wheel drift across a wet wooden golf bridge in our neighborhood and the thing shot out from underneath me. Took ...

It's going to take more effort to cut this one than it did on my CC RPM Worlds build. Fortunately this body that Jumpin' Jack painted is the perfect match for this build.

I decided to attempt to clean up the body and see if it could look decent on the shelf. I removed some of the extraneous decals and hit some of the worst curb rash with 1000 grit sand paper. Then I applied some PlasticX polishing compound and buffed it with a rotary buffer. 20250127_092016.jpg Looks...

The pics show an early Jrx T unter that red shell! I see the NIP black super star wheels on the bench, so what's the plan? Yup - a fairly early truck. The NIP wheels reveal a part of the plan... :D I remember you here from wsyyyy back when this place was young- Ditto! It's nice to find some time to...

Tackling the transmission first. The XXX 2.43 idler is the same as the 2.19 idler, as is the top shaft. This case is of course cracked in two places (get the feeling that they are all prone to that) the internals look ok, just dirty and dry...so- if you're still looking for a trans case I have an u...

That would be great! I am trying to figure out how to get private messages to work. I appreciate it! Your profile, then board preferences! He has the new member private messages restriction. Not enough posts made yet. It's intended to prevent people from joining just to harass other members. The qu...

Never thought I'd find one of these. This was my first RC10. Pretty sure mine was a late edinger simply due to when I purchased it but this Cadillac is close enough. The kit came as stripped down as could be- no electronics, no body, no wing, no driver. I had a stock car body on mine first, later we...

Bat Wedgies!!! (2) Very cool!! Thanks Robb!

That MIP bar is great on track, especially if you run the bar on top of the bellcranks- also the LXT castor blocks are the same as the Jammin Steering Enhancement kit, they're a little beefier and allow axle height adjustment with the stock steering arms...last trick I found on the front end is the...

I figured a click bait Youtube style thread title wouldn't suck ... buuuut I'm sure i figured wrong. :mrgreen: While searching for some JRXT parts in the basement, I was reminded that I had a Ebay score JRX2 abandoned on a dark shelf. After blowing off the cobwebs, the minty-ness was revealed, as we...