RC10Talk - The Net's Largest Vintage R/C Community

I picked up this 'Fantom' alloy rear bulkhead recently.
Just a shame its purple not blue!

Hi helios1, 85Edinger, stickboy007, thank you very much for all compliments! @helios1: I`ve cut the nose plate and chassis sides on my own. Both sides are cut down to 18mm. I`ve included some pictures. @85Edinger: I tried to do a very nice runner with not to many color mixes. I think that the blue/b...

Like I wrote in last page, I managed to get a Tekin PXT 600 Pro that should work according to the seller. But since I will not never drive this car I will never find it out. The receiver plug is incorrect Futabe one, I need (according to my knowledge) Airtronics/Sanwa wire with two black wires with ...

i ran my ce in a vintage race this weekend. stock rear blocks. the car was glued. setup: front -1 camber gt wide axles b4 wheels (losi pink taper pins) 35wt #1's brown springs 1 degree toe out ride height 25mm rear klien arms rpm gt hubs b44 cvd's custom works .125" spacers -1 camber 30wt #1's ...

I had these original bodies painted by Mr. Gary Kyes who also painted many of the early box art bodies including the original JRx2 and JRxPRO. I'll post pictures as soon as I find the time to trim them, mount them up, and apply the original decals. Special thanks to Gary and his son Ken for the bodi...

He painted them last month. I saw his eBay auctions for the bodies and read the description. Saw that they offer painting services so I inquired. His son still has the auctions going so it isn't too late. If I had another decent JRx2 roller, I'd do either the body he's holding in the picture or the ...

Hi guys, I hope I can answer some of your questions. @LittleVETTE - Regarding the upper deck thickness. The upper deck needs to be as thin as possible without breaking. A thin upper deck lets the chassis flex side to side but the design keeps it stiff front to back. @ Nikki - At the time we only cou...

I use sticks also and have been one of the lucky ones to have raced against him in my heat, beat him as well but does make sense. So possibly an 11 like CD.

Some of you had asked who all raced the '91 Stealth cars in Detroit. I can't remember all of them but I believe we had 15 or 16 cars there. Here is the list below of who I think raced them. I could be wrong about one or two of them but this is the best list I could come up with. Maybe some of you ca...

well done to you guys that have got this stealth buggy looking so good. i was in Sydney for the 89 worlds (sadly i missed the 2wd finals) and saw masami drive his dog fighter around that track like it was on rails. it would be great if there was a replica of his dog fighter of the day with the 4x2 c...

i would love a kit .. always love that car i think ill just leave this here [youtube]odYYjUk17IE[/youtube] The track looks long gone now! https://www.google.co.uk/maps/place/Freedom+Hill+Co+Park/@42.5635829,-82.978213,89m/data=!3m1!1e3!4m2!3m1!1s0x8824d94922b99f5d:0xb3a2ccfce93f158d As a kid who gr...

Wow!!! I've been an AE nut since the late 80's, and have quite a vast collection of their models, but this, this is something else!!! Well done Niki and Jake!!!!!!! This is quite a work of art. As I just finished reading this entire novel of a thread :lol: , I haven't looked to see if these kits are...

Thinking that my vintage Scorpion with a lightweight radio box would fit this thread!

I was recently in contact with Masaaki Hirosaka through email and this popped up in the conversation at some point and wanted to share it with you all. Here is his note about the prototype you can see below: "There is a prototype that I made last in Yokomo for the World Championship race. This ...

I found some pics more from Craig's stealth: Jirka