** Build of the Month Contest - April 2021 ** Winner - TheDiamondOne

[scr8p]

Open To Any Manufacturer!

OK, this will be the thread for the April 2021 Build of the Month Contest.

Refresh yourself with the rules before entering - http://www.rc10talk.com/viewtopic.php?f=98&t=35923

Please remember, no chit chat until all of the entries are locked in so they can stay grouped together.

GOOD LUCK!!!

************************************************************************

** Place Holders **

If you would like to enter the contest, create a post as a "place holder". DO NOT POST ANY PICS. You have until the 5th of the month to lock in a spot (10 entries max). You will then have 2 days to edit your post and attach the pics of your entry. The poll will be started on the night of the 7th. If you have not submitted your pics by then you will be removed from the contest.

[Dadio]

This is Yo-Clone-Oh , there is not one Yokomo part on the car anywhere , the chassis is a hand made part , every other plastic part including wheels , suspension , gearbox , gears and chain sprockets are 3D printed from CAD models I drew up as copies of the original YZ-834b Dogfighter , it's got my own take on the Delta Desert Dog rear suspension , its fully functional , fully expendable and an unashamed runner .
The project sprang from my love of driving my original car and from the inevitable attrition it caused , in short I wanted to be able to drive it hard ! So this was my answer , its mostly printed in Carbon Fibre infused Nylon and its very tough indeed . This is the whole build thread https://www.rc10talk.com/viewtopic.php?f=29&t=44144&hilit=yo+clone+oh The body is an old runner body that I've been using for practice with a new airbrush .

[juicedcoupe]

This here is my RC10 street buggy. It started out as a spare parts build and morphed into a little more.

It's mostly a basic A stamp with black dyed parts, setup in full long wheelbase. The six gear was rebuilt with some re-re parts and outdrive bearings.
- The hex conversion is a little different, consisting of B4 blocks, Traxxas carriers, and Pro SC10 axles. Factory Works hexes handle the rear.
- The shocks are Tamiya CVA's with AE and Traxxas springs, cups, and ends.
- The wheels are wide offset RPM Revolvers, for a crawler (1.7 wide), with rear buggy Duratrax Bandito's all around.
- Electronics consist of a Novak Polaris, Futaba S132H, AE SC200, and Reedy Radon.
- The body is a JConcepts Dominator Worlds.

Click images for better resolution.

[TheDiamondOne]

This is a car me and my brother raced against in the 80s and were lucky enough to buy from the original owner this winter and do a resto on it. It does have modern esc, lipo, servo because this is a runner, it runs strong.
Build thread here: https://www.rc10talk.com/viewtopic.php?t=45684
Tap pics for clarity.

[Paolino70]

new adventure for me...
ok guys, here is my model, kyosho Turbo Optima Mid.
Totally original.
the electronics are completed by an EX-5 Ko Propo remote control, Kyosho Le mans 240 S engine
esc novak Racers.
my build topic https://www.rc10talk.com/viewtopic.php?f=30&t=45760
that's all.

[THEYTOOKMYTHUMB]

https://www.rc10talk.com/viewtopic.php?f=37&t=45723&start=60

[mAdMan]

I don’t think I’ve ever submitted a build.

Here is my most recent one. A RC10GT2 I converted to a SC10GT-e

I built my own chassis out of 1/8” 7075 aluminum. It’s lengthened 43mm, converted to electric, converted to hex, RPM front sc10 bumper, rear SC10GT bumper, prosc10 nerf bars, factory team chassis brace, 12mm big bores, 2.2/3.0 jconcepts front rib and Proline gladiator rears with pro line bead lock wheels and carbon fiber bead locks. The body is a Jconcepts Illuzion and the body mounts are SC10 fronts (with a SC10 tower) and SC10 rears (with the original GT2 tower). Electronics are GoolRc 3500kv motor with 60a esc, associated s1903mg servo, and a XP3G tx/rx combo. I had a lot of fun building this and will definitely build another.

[winner_evo]

Tamiya TT-01 Lancia HF integrale evo replica of my real car. Purchased in 2005 and it gets run on occasion.

Mods include: Full bearing kit, Aluminium Prop, GPM Bell crank, GPM motor mount, 3Racing shocks, aluminium hex drives, Killerbody aluminium wheels, HPI tyres, Hobbywing EZ Run Brushless combo (4300kv) 2s lipo, Hi-tec HS-625mg servo, Futaba 2.4 Radio.

[RC10th]

Here's my take on a classic.

Here’s my build thread https://www.rc10talk.com/viewtopic.php?f=32&t=44145

[radioactivity]

This is a Bear Hawk that was taken from very rough to very nice.

A vey short build thread https://www.rc10talk.com/viewtopic.php?f=32&t=45621&p=517110&hilit=bear+hawk#p517110

Chuck

[Johanp]

Sorry, late to the party.
I hope I can get that last spot?

Losi Jrx2.
Ebay wreck brought back to life.
Build thread: viewtopic.php?f=27&t=45835

Futaba 27MHz receiver, Futaba S148 servo, Novak T-4 esc, Peak Performance motor and PTI Super Matched 1400 SCR.
Just as I remember from back in the day when I started racing.

[TRX-1-3]

THUMBINATOR! Finally something I might vote for!

[coxbros1]

THUMBINATOR! Finally something I might vote for!

You never voted for his Hornet?

[Dadio]

Hey Thumbs what's the name of your motor ? , That's a crackin car mate !

[THEYTOOKMYTHUMB]

Hey Thumbs what's the name of your motor ? , That's a crackin car mate !

Thanks Dadio! They are officially called "PRETTY PUNY SISSY LITTLE WIMPY MOTOR" They are fairly obscure and I believe originated as part of GONZO batteries. I think both from Indiana, but I'm not sure. They were relatively popular at the track I grew up on for a period because the proprietor sponsored a hand-out race at our track. they were all silver cans though, so when i saw the green on ebay, I had to have it!

I like your entry too. A couple of weeks ago we spent the week in a beach condo near Fudpucker's restaurant/alligator farm and ate there a couple of times. I think you'd approve!

https://fudpucker.com/