Car #6 SC10 Street Outlaw Pro Mod conversion

[KidAgain]

Finally got the esc, motor and cap pack installed. Waiting on my custom wheels before I try the Raw Speed slicks with tire inserts.

[KidAgain]

After some suggestions about my rear wheels deflecting back and forth under launch I made some ' No Hop Bars' and took 90% of the slop out, hope it works out have 2 events lined up...............

[KidAgain]

Some custom wheels from Davis Design and Graphics and updated rear wing from WINGS THAT WORK.

[KidAgain]

Well lost in the second round with my totally new set up, test run and round 1 were really soft on the base tune in the ESC but made it A to B, turned the heat up a tad to be competitive and the car went out 5-10 feet and chattered the tires pulling me to the right........................................

Here are my DE super soft tires with tire inserts glued in with no foam, wanted to try something different but my suspension tune wasnt up to par with this tire set up. Practice practice practice

You can see the nice contact patch:















Working on a new body also just fitted ready for Andy

[KidAgain]

Made a drive to Scottsdale AZ for the Quick 16 with the 48oH boys didnt go to well major electronic issues.

First I would like to thank Jack Kloeber from PRO TUNE MOTOR and his family for their hospitality had a great time with them the past few days.

Things didn’t go as planned last night @ the AZ Quick 16 for my car lots of electronic issues. The AZ guys are top notch between Jack, James Gallatin, Ethan Kovalsky, Erik and Ryan Maifield we did our best to get my car to make runs.

Q1-R1 esc ejects it’s sensor port during first burnout game over so I thought, Jack digs into his box pulls out a spare esc and we frantically switch out everything with the help of Eric get everything buttoned up and the program box won’t connect fuck it make a run.

Q2-car goes down but not quick enough can’t tune so Jack pulls out another esc out of his box mind you I’m running out of time to make runs, in jumps Erik again along with Ryan Maifield trying to button things up for me while James is being extremely patient with me (Thanks bud) Jack connects the programmer and throws a quick and dirty tune with time running out.

Q3-car leaves hard mid track pulls right let off didn’t want to kill the timing system game over.

It was so awesome how everyone jumped in to help when they had their own crap to deal with I can’t wait for the next AZ run.

Totally different car from the last event after Jack and Ethan gave the car a once over, she leaves straight the stance is different and the DE tires with inserts and foam from Tony Bjerke worked awesome traction wasn’t an issue.

O yah 2 teens or bust













New body from Andys Paint for the next event.............








Ryan Maifield and Erik Denk jumping in trying frantically to get my car going so freakin cooooooooooooooooooooooool:

[romulus22]

These things look like a blast, even just sitting stationary they look cool. All I need now is another Expensive part of the hobby to distract me from my other expensive endeavors.

[KidAgain]

New front DE Racing skinnies:

[scr8p]

I just picked up an sc10 dirt cheap. Going to build a low budget no prep car. I'll probably hit you up for setup tips I'm sure.

[TRX-1-3]

This thing definately looks "pro modded". So much carbon its nuts!

[therigliveson]

What's the 411 on the front wheels?

[KidAgain]

I just picked up an sc10 dirt cheap. Going to build a low budget no prep car. I'll probably hit you up for setup tips I'm sure.

Anytime bud im actually building another one as we speak (stock chassis) anything I can do to help let me know..............................

[KidAgain]

What's the 411 on the front wheels?

DE new skinnies haven't ran them yet but people who have like them and they are lighter............................34.8 grams

[KidAgain]

Went out to Yuma AZ for the Southwest Nationals Drags and had a blast watching these cars....................

13.5 fastest pass 2.64 and a 2.67

Outlaw fastest pass 2.11 with a bunch of 2.13's and 2.19's but in the finals it was a 2.33 that got the win..........................

Will have videos and pics up soon.

[KidAgain]

Have to step up my game a little went with a locked ball diff this time:

[KidAgain]

Also this weekends Toy Drive Drags come down and enjoy the fun........