2014 stealth

Everything pertaining to the RC10 buggy re-releases.
Classic, Classic Clear, World's, etc...

Moderators: scr8p, klavy69

slow_jun
Approved Member
Posts: 958
Joined: Mon Oct 05, 2009 10:59 am
Location: Manila/Singapore
Been thanked: 3 times

Re: 2014 stealth

Post by slow_jun »

Felt gasket,end caps,outdrives (L/R) that all that matters... hahahah..... please AE.. hurry up!!!!! :lol: :lol: :lol:

and oh... motor guard for graphite.....perfect!!!!
“It is more shameful to distrust our friends than to be deceived by them.”
― Confucius

slow_jun
Approved Member
Posts: 958
Joined: Mon Oct 05, 2009 10:59 am
Location: Manila/Singapore
Been thanked: 3 times

Re: 2014 stealth

Post by slow_jun »

now selling at Amain

Image
“It is more shameful to distrust our friends than to be deceived by them.”
― Confucius

ca-rj
Approved Member
Posts: 359
Joined: Sat May 18, 2013 4:12 pm
Location: Olathe, KS

Re: 2014 stealth

Post by ca-rj »

Wow, Stormer lists them for $69.95. Tower has them for $95.99. Prices are all over the map. $70 for a new one isn't too bad. I know I've paid over $40 for a used one that needed a rebuild.
RC10 Short Arm | Novak Tempest ESC | Tamiya Torque Tuned 25T | Savox 1258 | Stealth Trans w/ Exotek Slipper Eliminator (geared 24/81)
RC10B3 | HW Just Stock Club Spec | Reedy 13.5 | Savox 1258

User avatar
uniquenamehere
Approved Member
Posts: 553
Joined: Tue Jun 07, 2011 6:34 am
Location: Ontario, Canada
Been thanked: 2 times

Re: 2014 stealth

Post by uniquenamehere »

I didn't see a confirmation either way, but is there a gasket in the re-release?

User avatar
GoMachV
Approved Member
Posts: 12174
Joined: Sun Apr 29, 2012 10:31 pm
Location: Twin Falls, ID
Has thanked: 1079 times
Been thanked: 3726 times

Re: 2014 stealth

Post by GoMachV »

No felt gasket

User avatar
Bottom Feeder
Approved Member
Posts: 323
Joined: Wed Nov 06, 2013 11:30 am
Location: Virginia
Has thanked: 13 times
Been thanked: 24 times

Re: 2014 stealth

Post by Bottom Feeder »

Are the standoffs and end cap molded into the new case halves now?

Image

Taken from http://www.teamassociated.com/parts/details/6564/

User avatar
GoMachV
Approved Member
Posts: 12174
Joined: Sun Apr 29, 2012 10:31 pm
Location: Twin Falls, ID
Has thanked: 1079 times
Been thanked: 3726 times

Re: 2014 stealth

Post by GoMachV »

I had not seen that! Sucks for the oval guys!!!!

SnoopMaxx
Approved Member
Posts: 699
Joined: Sat Mar 06, 2010 3:38 pm
Location: Vraa Denmark
Been thanked: 1 time

Re: 2014 stealth

Post by SnoopMaxx »

Bottom Feeder wrote:Are the standoffs and end cap molded into the new case halves now?

Image

Taken from http://www.teamassociated.com/parts/details/6564/
It looks like it
However they're not
Look at the photos of the stealth kit tranny halves on A-Mains page, they are still on the parts tree

http://www.amainhobbies.com/product_info.php/cPath/1_25_1450_3104/products_id/276213/n/Team-Associated-RC10-Stealth-Transmission-Kit

Image

Image

And you can see they are separate parts on the assembled tranny
Attachments
6560-assembled.ps_lg.jpg
Morten Max

User avatar
Bottom Feeder
Approved Member
Posts: 323
Joined: Wed Nov 06, 2013 11:30 am
Location: Virginia
Has thanked: 13 times
Been thanked: 24 times

Re: 2014 stealth

Post by Bottom Feeder »

Interesting. I wonder if it was just an idea they were considering, made some mock-ups, then dropped?

User avatar
marlo
Approved Member
Posts: 2071
Joined: Tue Jan 22, 2013 5:31 pm
Has thanked: 18 times
Been thanked: 22 times

Re: 2014 stealth

Post by marlo »

The cases are a little different from the originals 8)

SnoopMaxx
Approved Member
Posts: 699
Joined: Sat Mar 06, 2010 3:38 pm
Location: Vraa Denmark
Been thanked: 1 time

Re: 2014 stealth

Post by SnoopMaxx »

marlo wrote:The cases are a little different from the originals 8)
They are made using the original molds
Morten Max

User avatar
marlo
Approved Member
Posts: 2071
Joined: Tue Jan 22, 2013 5:31 pm
Has thanked: 18 times
Been thanked: 22 times

Re: 2014 stealth

Post by marlo »

SnoopMaxx wrote:
marlo wrote:The cases are a little different from the originals 8)
They are made using the original molds
reinforcements are not present on the originals, cannot be the same molds :wink:

SnoopMaxx
Approved Member
Posts: 699
Joined: Sat Mar 06, 2010 3:38 pm
Location: Vraa Denmark
Been thanked: 1 time

Re: 2014 stealth

Post by SnoopMaxx »

marlo wrote:
SnoopMaxx wrote:
marlo wrote:The cases are a little different from the originals 8)
They are made using the original molds
reinforcements are not present on the originals, cannot be the same molds :wink:

I'll rephrase that

"They are made using the original molds as a base"

Oh and look closely at the kit on A-Mains page
the one in the packing does not have the extra support

Full size photo
So which one do we get
Image
Morten Max

User avatar
marlo
Approved Member
Posts: 2071
Joined: Tue Jan 22, 2013 5:31 pm
Has thanked: 18 times
Been thanked: 22 times

Re: 2014 stealth

Post by marlo »

Hmmm, your right :? looks like 2 versions are out there.

slow_jun
Approved Member
Posts: 958
Joined: Mon Oct 05, 2009 10:59 am
Location: Manila/Singapore
Been thanked: 3 times

Re: 2014 stealth

Post by slow_jun »

maybe the stock kit comes with the standoff and end caps not built in as oppose to the pics with just the tranny case, well maybe, can only speculate.
“It is more shameful to distrust our friends than to be deceived by them.”
― Confucius

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post

Return to “RC10 Buggy Re-Release Forum”

Who is online

Users browsing this forum: User avatarDustydrone, No User Avatarmark and 8 guests