Messed up brand new parts

General info, Q&A.

Moderators: scr8p, klavy69

User avatar
asashaw
Approved Member
Posts: 321
Joined: Thu Apr 05, 2007 1:27 am
Location: NY

Messed up brand new parts

Post by asashaw »

This is from my post: http://www.rc10talk.com/viewtopic.php?f=4&t=3056&start=0&st=0&sk=t&sd=a

All parts came out of a NEW kit. :shock:

The chassis is missing its anodizing in spots but not faded. It looks like it was rubbed off or something. I tried and will keep trying to take a picture but the glare from my camera keeps messing it up. The transmission case has poor mold lines and looks like it was "melting" when it came out of the mold. There are also air pockets in the mounting screws etc. The rear wheel looks like there was dirt in the nylon or mold grew in there. These marks are not on the outside as you can see.

Anyways, I just thought it was funny to see some parts that came in a NEW kit that probably should not have made it past inspection. :lol: Any thoughts?
Attachments
resized02.jpg
resized02.jpg (150.08 KiB) Viewed 1337 times
resized02.jpg
resized02.jpg (150.08 KiB) Viewed 1337 times
resized01.jpg
resized01.jpg (156.4 KiB) Viewed 1338 times
resized01.jpg
resized01.jpg (156.4 KiB) Viewed 1338 times
resized03.jpg
resized03.jpg (148.82 KiB) Viewed 1334 times
resized03.jpg
resized03.jpg (148.82 KiB) Viewed 1334 times
resized04.jpg
resized04.jpg (154.96 KiB) Viewed 1333 times
resized04.jpg
resized04.jpg (154.96 KiB) Viewed 1333 times

User avatar
Eau Rouge
Approved Member
Posts: 2225
Joined: Sat Jul 29, 2006 11:59 pm
Location: Aurora, Illinois
Has thanked: 2 times
Been thanked: 2 times

Re: Messed up brand new parts

Post by Eau Rouge »

Kit character. :D

Quality control is spot-on for a company of that size in 1985. ;)

User avatar
scr8p
Administrator
Posts: 16549
Joined: Tue Feb 07, 2006 9:46 pm
Location: Northampton, PA
Has thanked: 29 times
Been thanked: 978 times

Re: Messed up brand new parts

Post by scr8p »

i'm thinking you should just send me the trans case for further inspection. the tub, too. :wink:

User avatar
shodog
Approved Member
Posts: 3816
Joined: Thu Oct 05, 2006 3:09 pm
Location: Washington
Has thanked: 3 times
Been thanked: 86 times

Re: Messed up brand new parts

Post by shodog »

I have some shock caps that have no threads in them.

User avatar
mikedealer
Approved Member
Posts: 1778
Joined: Fri May 18, 2007 12:25 am
Been thanked: 1 time

Re: Messed up brand new parts

Post by mikedealer »

call associated and tell them you want it warrantyed lol, they replaced my b4 chassis 3 times now

User avatar
Mr. ED
Approved Member
Posts: 5478
Joined: Thu Dec 21, 2006 1:30 am
Location: Back @ home: Belgium
Has thanked: 58 times
Been thanked: 56 times

Re: Messed up brand new parts

Post by Mr. ED »

When I got my first RC10 parts not long ago,I was surprised about how low the asso parts quality was compared to my kyosho parts of the same age.
But what really puzzles me is how the stealth is so complete different of the other parts in finish and design.
Was it designed by another comapny for Asso, or what's the story behind it anyway?

aconsola
Approved Member
Posts: 1998
Joined: Fri Feb 16, 2007 10:09 pm
Location: Upstate NY
Been thanked: 12 times

Re: Messed up brand new parts

Post by aconsola »

I got some turnbuckles in my rc-18 FT kit that took me a while to figure out why they would not thread onto the ball cups.
Luckily one Call to AE got me some new ones in the mail
Attachments
aerods02.jpg
aerods02.jpg (38.65 KiB) Viewed 1265 times
aerods02.jpg
aerods02.jpg (38.65 KiB) Viewed 1265 times

User avatar
mikedealer
Approved Member
Posts: 1778
Joined: Fri May 18, 2007 12:25 am
Been thanked: 1 time

Re: Messed up brand new parts

Post by mikedealer »

ya i gotta give it to AE, they do TOTALLY take care of customers when parts are bad. I had friends who had a mis-shaped body, got 2 new ones right away. in a b3 kit i think i had some bad parts and got them shipped right away..


On the other hand, LRP warranty is ABSOLUTELY ABSOLUTELY TERRIBLE! NEVER BUY LRP lol. I personally have experienced a nightmare with LRP and associated and have read horror stories about it. First, they ship the stuff to germany to get fixed, then it takes absolutely forever to get back. Took me almost 8 months to get my LRP 7.1 warrantied, just died one day, and while they were very very apologetic, it still doesnt make up for the fact that i had to buy a new one to continue racing for the season.

I only buy tekin and novak now, i think tekin has the quickest turnaround, i sent back 5 bad esc's one day, i got them all back in less than a week and it was ridiculously cheap to repair, they totally valued my business.

RC Chick
Approved Member
Posts: 566
Joined: Tue Aug 07, 2007 4:02 am
Location: Anaheim,Ca.

Re: Messed up brand new parts

Post by RC Chick »

mikedealer wrote:ya i gotta give it to AE, they do TOTALLY take care of customers when parts are bad. I had friends who had a mis-shaped body, got 2 new ones right away. in a b3 kit i think i had some bad parts and got them shipped right away..


On the other hand, LRP warranty is ABSOLUTELY ABSOLUTELY TERRIBLE! NEVER BUY LRP lol. I personally have experienced a nightmare with LRP and associated and have read horror stories about it. First, they ship the stuff to germany to get fixed, then it takes absolutely forever to get back. Took me almost 8 months to get my LRP 7.1 warrantied, just died one day, and while they were very very apologetic, it still doesnt make up for the fact that i had to buy a new one to continue racing for the season.

I only buy tekin and novak now, i think tekin has the quickest turnaround, i sent back 5 bad esc's one day, i got them all back in less than a week and it was ridiculously cheap to repair, they totally valued my business.
Am I missing something here? I fyou say that lrp sucks cuz you sent 1 and it took forever to get it repaired but you sent 5 back to tekin doesn't that mean tekin is bad? Just my 2cents

User avatar
mikedealer
Approved Member
Posts: 1778
Joined: Fri May 18, 2007 12:25 am
Been thanked: 1 time

Re: Messed up brand new parts

Post by mikedealer »

sounds that way, 2 were from ebay being "known not working", 1 of them i crossed the wires and blew up a fet, 1 was for fuse replacement, and the last if i remember needed a "resolder" cause the fets became loose.

i ran tekin for years, and i destroyed the living crap outta them, i got a box of 15-20 tekins that still probably work perfectly but are probably old.

i think others will agree tekin definetly is a solid product. Ive NEVER had one die on me during a race, they are solid and run a LONG time, i use to run 3-4 battery packs in a row in a 1-2 hour period and they kept on ticking lol

RC Chick
Approved Member
Posts: 566
Joined: Tue Aug 07, 2007 4:02 am
Location: Anaheim,Ca.

Re: Messed up brand new parts

Post by RC Chick »

ah ok now it makes sense. my appologies.

User avatar
scr8p
Administrator
Posts: 16549
Joined: Tue Feb 07, 2006 9:46 pm
Location: Northampton, PA
Has thanked: 29 times
Been thanked: 978 times

Re: Messed up brand new parts

Post by scr8p »

tekin esc's rule. always have. :wink:

User avatar
mikedealer
Approved Member
Posts: 1778
Joined: Fri May 18, 2007 12:25 am
Been thanked: 1 time

Re: Messed up brand new parts

Post by mikedealer »

i always loved tekin, i have used novak and lrp to race competitively, and honestly i always go back to tekin.. The only reason i was running the LRP 7.1 was because EVERYONE at my track was running one, and i felt like a outsider running anything else lol, plus i found it on ebay for $70 new but opened package lol.

Novak has always been really good too, but i kinda stopped using them around the time the cyclones came out, i always thought they were peices of trash, i went to tekin after the cyclones.

User avatar
asashaw
Approved Member
Posts: 321
Joined: Thu Apr 05, 2007 1:27 am
Location: NY

Re: Messed up brand new parts

Post by asashaw »

shodog wrote:I have some shock caps that have no threads in them.
I would love to see them... BTW no pressure, I just need to know if you decided on the body, because I sold the front wheels, and jeff just asked me about the arms, and I feel somewhat obligated to let him know either way. Did you think 35 for the pair was a fair offer from him? Anyways, please pm me if you could, I can always pay cash for the body or we can still figure out a trade for the arms, etc. Thanks man :)

User avatar
asashaw
Approved Member
Posts: 321
Joined: Thu Apr 05, 2007 1:27 am
Location: NY

Re: Messed up brand new parts

Post by asashaw »

scr8p wrote:i'm thinking you should just send me the trans case for further inspection. the tub, too. :wink:
further inspection 8)

brake fluid maybe... :lol: hard to see the pics I know, its the best i could do
Attachments
DSCN5048.JPG
DSCN5048.JPG (149.75 KiB) Viewed 1184 times
DSCN5048.JPG
DSCN5048.JPG (149.75 KiB) Viewed 1184 times
DSCN5049.JPG
DSCN5049.JPG (126.05 KiB) Viewed 1186 times
DSCN5049.JPG
DSCN5049.JPG (126.05 KiB) Viewed 1186 times
DSCN5051.JPG
DSCN5051.JPG (136.92 KiB) Viewed 1181 times
DSCN5051.JPG
DSCN5051.JPG (136.92 KiB) Viewed 1181 times

Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

  • Similar Topics
    Replies
    Views
    Last post
  • Have i messed up my white parts?
    by Caine » » in RC10 Buggy Forum
    24 Replies
    2354 Views
    Last post by Caine
  • What brand are these?
    by clinehobbies » » in Identifications
    15 Replies
    1887 Views
    Last post by Dr. Robotnik
  • BRAND NEW 94 YZ10
    by DemZ » » in Yokomo Forum
    11 Replies
    2181 Views
    Last post by bully
  • Brand-Spankin New YZ-10
    by coralguy1 » » in Yokomo Forum
    20 Replies
    2484 Views
    Last post by coralguy1
  • My Brand New SRT
    by nagreend » » in Traxxas Forum
    7 Replies
    2048 Views
    Last post by nagreend
  • Brand new Hammer-
    by Charlie don't surf » » in Off-Topic / Chit-Chat
    39 Replies
    2421 Views
    Last post by slotcarrod
  • Brand new TRX-1??
    by hkp » » in Traxxas Forum
    30 Replies
    4291 Views
    Last post by vwjuice
  • Brand New RC10t4
    by ginintonix » » in 21st Century Modern
    3 Replies
    930 Views
    Last post by Panhead383

Return to “Temple's RC10 Tech Forum”

Who is online

Users browsing this forum: No registered users and 1 guest