RC10Talk - The Net's Largest Vintage R/C Community

Thanks guys! The front are Jconcepts swaggers and the rears are Schumacher mini spikes

This Bud's for you My sticker sheet finally came in and was the perfect size so I couldn't be happier. The real truck is sticker bombed to the hilt and I wanted this to look a bit cleaner. All in all I think it came out great. Also, since I can't find strikers these cut Street Trac tires look the p...

Coming along nicely! Those front springs do look a little short. There are plenty on eBay for the T4 that should fit. If it's a parking lot runner I'd chose a firm spring like Red. I use the silver medium spring for carpet racing at the local track. That is where the preload starts, so I wasn't sur...

Okay, this is where I post this totally useless comment.
Happiness is having an old RC10 to restore.

Pick up a re-re bulkhead to use and put the original away for when you decide to restore it. 1S lipo = 3.7v 2S lipo = 7.4v 3S lipo = 11.1v Stick to 2S 7.4v lipos as thats the "standard" for 1/10 vehicles, you could run 3S if you wanted to but you don’t need it. The Mah is just the capacity...

JC Racing (from the UK) might be an option for you. They are availabe in White, Black, and Yellow. Shown with Pro-Line Dirt Hawg tires.

The majority of the A stamps had the 1st series of rear bulkhead that would not allow the forward placement of the rear arm mount (unless you notched the bulkhead yourself). After the change to the 2nd series bulkhead which allowed the forward placement, the tub was clearanced in those corners. So, ...