Setup questions

[arf]

I run my gold tub on a flat parking lot and considering decreasing front caster and rear toe from stock.

1. My spares include #6366 (1.5 deg.) rear hub carrier which gives 3 deg. toe in when used with the stock #6360 suspension mounts. What does the original #6365 rear carrier give? The old manual doesn't say. Also of interest is that my manual for the RC10 graphite shows the #6366 carriers are standard for that car. So the graphite car had different rear toe?

2. I also have a couple of #6214 (20 deg.) front block carriers, but how much caster does the original #6213 give?

Hope that made sense. Thank you humbly.

[scr8p]

the 6355's are zero degree.

when the widetrack cars came out they went to the 1.5 hub carriers.

the 6213 castor blocks were 15 degree.

[arf]

the 6355's are zero degree.

when the widetrack cars came out they went to the 1.5 hub carriers.

the 6213 castor blocks were 15 degree.

Thank you, I assume you meant #6365 are zero degree.

[scr8p]

yup, 6365. sorry about that.