Page 1 of 1
I won some ebay parts..what exactly did I get? LOL
Posted: Fri Jan 02, 2009 9:37 pm
by y2kgtp
i think they are Jrx2.....or jrxt?
Re: I won some ebay parts..what exactly did I get? LOL
Posted: Fri Jan 02, 2009 9:51 pm
by aconsola
y2kgtp wrote:i think they are Jrx2.....or jrxt?
yes and no.
Some fit all the original cars, some are LXT specific
Re: I won some ebay parts..what exactly did I get? LOL
Posted: Fri Jan 02, 2009 9:57 pm
by bearrickster
The single arm and body mount and top steering set are LX-T, the bulkheads w/arms look like Junior 2 or T, the H arms are Jrx pro-Junior 2,T, Battery Box all Jrx style cars.
Re: I won some ebay parts..what exactly did I get? LOL
Posted: Fri Jan 02, 2009 11:33 pm
by y2kgtp
bearrickster wrote:The single arm and body mount and top steering set are LX-T, the bulkheads w/arms look like Junior 2 or T, the H arms are Jrx pro-Junior 2,T, Battery Box all Jrx style cars.
Well, I guess I can use the battery box
Anyone need some parts?
Anything I can use for a Jrx2 or JRXT ?
Re: I won some ebay parts..what exactly did I get? LOL
Posted: Fri Jan 02, 2009 11:41 pm
by highwayracer
Let's start from the top:
red bell cranks, short steering rack, castor blocks and steering block - LXT
next 2 sets of arms / bulkheads etc. are from a jrx 2. If the axles have a set screw in them (to hold the kingpin), then these would be from a jrx pro.
rear hubs (on the left) - jrx pro / jrx pro SE / junior 2 / LXT (anything with the h-arm set up)
red bell cranks, short steering rack & steering posts - If the hex at the bottom of the steering rack is about 1/8 of an inch tall, then this would be for the jrx pro. If the hex is about 1/4 of an inch tall, then this is for a jrx pro SE
battery cup - jrx pro / jrx pro SE / junior 2 / LXT
h-arms with rear hubs - jrx pro / jrx pro SE / junior 2
single front arm - LXT
front body mount - LXT
table - Staples model 4128 light oak laminate
Regards,
highwayracer
Re: I won some ebay parts..what exactly did I get? LOL
Posted: Fri Jan 02, 2009 11:53 pm
by y2kgtp
highwayracer wrote:Let's start from the top:
red bell cranks, short steering rack, castor blocks and steering block - LXT
next 2 sets of arms / bulkheads etc. are from a jrx 2. If the axles have a set screw in them (to hold the kingpin), then these would be from a jrx pro.
rear hubs (on the left) - jrx pro / jrx pro SE / junior 2 / LXT (anything with the h-arm set up)
red bell cranks, short steering rack & steering posts - If the hex at the bottom of the steering rack is about 1/8 of an inch tall, then this would be for the jrx pro. If the hex is about 1/4 of an inch tall, then this is for a jrx pro SE
battery cup - jrx pro / jrx pro SE / junior 2 / LXT
h-arms with rear hubs - jrx pro / jrx pro SE / junior 2
single front arm - LXT
front body mount - LXT
table - Staples model 4128 light oak laminate
Regards,
highwayracer
I don't think I will get the table in the package.....I have enough tables in my office as it is