RC10Talk - The Net's Largest Vintage R/C Community

Hey all...

Had this body for literally AGES...... and would like to ID it to offload it.

Has a label on the front which reads:

FP-2173
TRUCK BODY

Serial No.0006-

Pic attached....

Anyone????? I thought maybe a Dahms.....

Alex

any idea what it fits?

i dont know who makes it, but it looks like an RC10GT body with the rear shock tower risers placed so far back. maybe a Losi GTX or NXT also?

Well, as an example, here's a picture of it on my RC10T (that I forgot I had! )...

You can see that, although the shock towers are sort of in the right place (to fit the bulges), the body mounts are waaaay off.

I've also done a comparison shot with what I *guess* is a proper RC10T shell......

If it helps, the front body post holes are marked in the shell about a half inch in front of the base of the windscreen (two holes), and the rear mount is a large-ish slot right at the middle rear of the bodyshell...

Alex

Possibly a Frewer body for the GT?

templeofspeed wrote:Possibly a Frewer body for the GT?

I have a lot of Frewers, and they're generally a better lexan, and better 'pulled'. Also, I don't think I've ever seen a Frewer with a label on it like that one before......

Keep going though..... all ideas help!

Alex

how wide are the front body holes spaced? how big is the body mount slot in the rear?
2 front posts and a single center mount in the rear makes me think of traxxas nitro trucks like the nitro sport and rustler.

it's gotta something fairly new. they haven't been putting protective film on bodies all that long.

aconsola wrote:how wide are the front body holes spaced? how big is the body mount slot in the rear?
2 front posts and a single center mount in the rear makes me think of traxxas nitro trucks like the nitro sport and rustler.

Mate, that's not a bad guesstimate..... I've attached a pic compared to a Rustler body I have. Front mounts match up perfectly, but the rear mount is nowhere near. I found another smaller slotted mount (shock mount style) in the middle of the bed, but it doesn't quite line up with the Rustler rear mount..... but we're getting closer!

Alex

http://www.rctech.net/forum/nitro-off-road/229421-traxxas-nitro-hawk-parts-compatibility.html

traxxas nitro hawk? Same front body mount, but the rear has a flat plate for a shock tower so the body hole should be a slot vs the circle hole for the plastic molded shock tower on the rustler.

Maybe somebody here has one and can measure the distance for you?

hello All,

That's the body for the Flying Point Enterprise PIZAZZ - TK1. It shares many parts with the nitro hawk. I scanned the picture a few months ago, but I can't seem to find the catalog that has the body pictured.

More information on that truck can be found here:
http://www.rc10talk.com/viewtopic.php?f=33&t=6358&p=60619&hilit=PIZAZZ#p60619

Regards,
highwayracer

here we are lots of people with lots of knowlege

highwayracer wrote:hello All,

That's the body for the Flying Point Enterprise PIZAZZ - TK1. It shares many parts with the nitro hawk. I scanned the picture a few months ago, but I can't seem to find the catalog that has the body pictured.

More information on that truck can be found here:
http://www.rc10talk.com/viewtopic.php?f=33&t=6358&p=60619&hilit=PIZAZZ#p60619

Regards,
highwayracer

Big thanks to highwayracer for the ID. That'll help me no end in working out what to do with this!!!

Alex

I found my catalog that has this body. Here's the ad with the body painted. In addition, I'm also posting a picture of the buggy body...fugggggggly
Regards,
highwayracer

highwayracer wrote:I found my catalog that has this body. Here's the ad with the body painted. In addition, I'm also posting a picture of the buggy body...fugggggggly

pizazz truck 2.jpg

pizazz car.jpg

Regards,
highwayracer

Their both pretty bad