RC10Talk - The Net's Largest Vintage R/C Community

I have myself a couple of sets of what I think are B3 teflon coated shocks. I have ordered some seal rebuild kits and when I stripped the shocks down I found most of the shafts to be bent. I was hoping I might track down some of the 'gold' stronger shock shafts like found on the B4. Can anybody please let me know the 2 different lengths I will need (front and rears) and even a good place to buy them from over the net? Thankyou in advance-Jason.

For the factory team shafts, the fronts are .71" #6418 and rears are 1.02" #6417. I usually get these from towerhobbies.com.