Page 1 of 1
Frankentruck's RC10 SSC10BB (Belted Build)
Posted: Mon Feb 24, 2025 1:46 pm
by Frankentruck
I had this pile of nice parts that deserved to go into a build. Then I finally latched onto an SSC10 chassis after missing one with some nice extras. But what about a black World's cut nose plate.... Hey, Yeah Racing makes one! Why not give that a try? Not everything I need is here (or has been located in my cubby holes
) but there's enough here to get started.
.
Re: Frankentruck's RC10 SSC10BB (Belted Build)
Posted: Fri Feb 28, 2025 5:53 pm
by Frankentruck
Found what I was looking for that was tucked away, my Hyperdrive parts. A belt drive transmission seems like a good place for it to get used. So I drilled up my outer hub with 4 more holes so I can use a 3 screw spur pulley mount pattern.
.
.
Then I found 2 problems. The Hyperdrive spur pulley uses an 8 hole pattern so I can't use 3 screws, and it also uses the larger diameter pattern. Doh!
So I drilled up my last MRP Ripper outer hub with a 4 screw pattern. Problem solved.
.
.
The Trackmaster got disassembled and reassembled with the motor plate on the opposite side, so I don't need a reverse rotation motor because of the Hyperdrive setup.
.
.
I still need to put together a pressure spring assembly for the slipper. But for now, everything seems to fit together correctly.
.
.
It seems like these Hyperdrive spurs are only intended to be used with a 6 gear hub setup. That just adds to the fun
Also, it sounds really excellent when it spins up!
Re: Frankentruck's RC10 SSC10BB (Belted Build)
Posted: Fri Apr 11, 2025 3:36 pm
by Frankentruck
Slipper done.
.
.
Now the chassis can start going together.
.
Re: Frankentruck's RC10 SSC10BB (Belted Build)
Posted: Fri Apr 11, 2025 3:42 pm
by coxbros1
Killer build!...anyone that doesn't like it and hit that button is a f...head!
Re: Frankentruck's RC10 SSC10BB (Belted Build)
Posted: Fri Apr 11, 2025 5:16 pm
by cas22
Interesting build, be great to see if you could post a sound byte or short video to hear it spooling up
Im imagining a supercharger gilmoor belt whine...
Re: Frankentruck's RC10 SSC10BB (Belted Build)
Posted: Fri Apr 11, 2025 10:47 pm
by Dangeruss
I was gonna hit that like button but all the sudden being a f...head! sounds like an awful lot of fun
! 
Re: Frankentruck's RC10 SSC10BB (Belted Build)
Posted: Sat Apr 12, 2025 10:02 am
by Frankentruck
cas22 wrote: ↑Fri Apr 11, 2025 5:16 pm
Interesting build, be great to see if you could post a sound byte or short video to hear it spooling up
Im imagining a supercharger gilmoor belt whine...
Comparison with a stealth. The recording kept doing noise cancelling at full power for the stealth. That or I have better hearing than my phone does.
https://youtu.be/iSXgCKs1LvY?feature=shared