Page 1 of 1
Yokomo turnbuckle shaft size?
Posted: Thu Feb 15, 2024 1:30 pm
by Frankentruck
Does anyone know what size Yokomo turnbuckles are? 4-40 or 3mm threads by any chance?
.
.
.
Re: Yokomo turnbuckle shaft size?
Posted: Thu Feb 15, 2024 2:03 pm
by Dangeruss
4mm for all three:
From the parts list page of the Yokomo YZ-4 SF...
As printed:
- Yokomo Turnbuckle size.JPG (8.84 KiB) Viewed 888 times
- Yokomo Turnbuckle size.JPG (8.84 KiB) Viewed 888 times
Translated:
- Yokomo Turnbuckle Size Translated.JPG (9.04 KiB) Viewed 888 times
- Yokomo Turnbuckle Size Translated.JPG (9.04 KiB) Viewed 888 times
No parts page that listed sd-tb20a so, from teamyokomo.com...
Also from teamyokomo.com...
Re: Yokomo turnbuckle shaft size?
Posted: Thu Feb 15, 2024 2:08 pm
by Frankentruck
Thanks.
Bummer, not an option for my needs
Re: Yokomo turnbuckle shaft size?
Posted: Thu Feb 15, 2024 2:50 pm
by Alex B
The Yokomo ones I've purchased have all been 3mm I've also used lunsford ones which are 4-40 which is broadly the same when it comes to screwing into ball joints.
Re: Yokomo turnbuckle shaft size?
Posted: Thu Feb 15, 2024 3:33 pm
by Dangeruss
Alex B wrote: ↑Thu Feb 15, 2024 2:50 pm
The Yokomo ones I've purchased have all been 3mm I've also used lunsford ones which are 4-40 which is broadly the same when it comes to screwing into ball joints.
I saw Techno listing their turnbuckles as 4mm then the thread as 3mm and wondered if Yokomo was doing the same thing.
Other possibilities...
CEN:
CQ0310 is a steel 3x25
CQ0313 is a steel 3x52
Integy:
C29050 is a titanium 3x26
C29057 is a titanium 3x52
Schumacher:
640203 is a titanium 3x20
7318 is a titanium 3x53
Acer:
43721226420472 is a titanium 3x24
43638996861176 is a titanium 3x52
Associated:
1418 is a titanium 3x21
1406 is a titanium 3x51
Re: Yokomo turnbuckle shaft size?
Posted: Thu Feb 15, 2024 4:01 pm
by Dangeruss
Ok.... so I cross-referenced the instructions for a YZ-2T:
- Yokomo YZ-2T copy.JPG (7.49 KiB) Viewed 870 times
- Yokomo YZ-2T copy.JPG (7.49 KiB) Viewed 870 times
Which shows the same "4mm" spec... then I took a caliper to one of the YZ-2T's I've got and the turnbuckle shaft measures out to 2.8mm
...Apparently the US isn't the only one with a standardization problem
Re: Yokomo turnbuckle shaft size?
Posted: Sun Feb 18, 2024 7:59 pm
by Frankentruck
Re: Yokomo turnbuckle shaft size?
Posted: Mon Feb 26, 2024 5:14 pm
by Frankentruck
All are 3mm rod turnbuckles
.
