RC10Talk - The Net's Largest Vintage R/C Community

Hi,

I have a Losi JRT. Looks like these were made in 1991 and not sure how long it was made or upgraded so not positive of the date of my truck. I can find many items but I cannot find the screw in ball joints. I ordered what I though were correct ones, without a part number, but when they came in the ball was too big for the socket ends of the turn buckles. I did find that the rear inner arm hinge pin (2008 S) is available because one of mine was broken. I just can't find a part number for the ball joints to find the correct ones.

I just want to get the few older 1/10 cars I have back together so any help would be appreciated.

Thanks

Russ

If you are taking about the ball studs, Custom Works studs are a good fit. They are 4-40 thread, like the originals.

Schumacher studs have the same size ball but with a M3 thread. These are helpful if you have a piece with a stripped 4-40 thread, as the M3 is slightly larger.