Page 1 of 1
XXX-NT AD2 eBay find
Posted: Sat Oct 23, 2021 10:53 pm
by kzeppelin2
Managed to grab this XXX-NT AD2 on eBay recently. It was complete except for the front chassis brace. The engine is an OS Max 12 TZ. Here are some pictures of what it looked like when it arrived.
Ready for reassembly after a good cleaning.
Now we just need a power plant.
The engine seemed fine. Internals looked great. Just needed a thorough cleaning. I understand this Max 12TZ was a terrific engine in its day.
I was able to get a shell from a T5M to fit after making some small body post adapters. This truck is incredibly fast. It is a terrific machine.
It is definitely a racer's machine.
Re: XXX-NT AD2 eBay find
Posted: Mon Oct 25, 2021 7:12 am
by matt1ptkn
That cleaned up well. Nice work!
Re: XXX-NT AD2 eBay find
Posted: Sun Mar 20, 2022 7:00 pm
by kzeppelin2
kzeppelin2 wrote: ↑Sat Oct 23, 2021 10:53 pm
Managed to grab this XXX-NT AD2 on eBay recently. It was complete except for the front chassis brace. The engine is an OS Max 12 TZ. Here are some pictures of what it looked like when it arrived.
IMG_3383 copy.jpg
IMG_3384 copy.jpg
IMG_3418 copy.jpg
Ready for reassembly after a good cleaning.
IMG_3434.jpg
Now we just need a power plant.
IMG_3453 copy.jpg
The engine seemed fine. Internals looked great. Just needed a thorough cleaning. I understand this Max 12TZ was a terrific engine in its day.
IMG_3504.jpg
Untitled 2.jpg
I was able to get a shell from a T5M to fit after making some small body post adapters. This truck is incredibly fast. It is a terrific machine.
IMG_3798.jpg
IMG_3800.jpg
It is definitely a racer's machine.
Does anyone know of any modern axle conversion methods for the AD2? I've found some that use the XXX-SCT parts but those are hard to find now as well. I'm just beginning my research now but figured I'd post here to see if anyone has ideas or has had recent success converting to front and rear hexs. Thanks!
Re: XXX-NT AD2 eBay find
Posted: Wed Mar 23, 2022 10:49 am
by Toyotachris1982
Well done beautiful truck
Re: XXX-NT AD2 eBay find
Posted: Sun Sep 18, 2022 10:45 pm
by RogueIV
kzeppelin2 wrote: ↑Sun Mar 20, 2022 7:00 pm
Does anyone know of any modern axle conversion methods for the AD2? I've found some that use the XXX-SCT parts but those are hard to find now as well. I'm just beginning my research now but figured I'd post here to see if anyone has ideas or has had recent success converting to front and rear hexs. Thanks!
rear is simple if it's pindrive, you just get some hexes. The front is the hard part but I devised a simple solution, adapters that fit in the JConcepts Mono 12mm hex wheels and make it so you can fit bearings into the wheels. It's over on Thingiverse (thing:5479821 just add this to the end of the URL, I can't post links yet.) if you have access to a 3d printer.
I use these on my electric converted XXX-NT
Another option might be to fit parts from the 22T to the truck but I haven't had a 22T around to take measurements from.
Or just run the RC10T wheels from JConcepts, offset isn't quite right but they'll still work.
Re: XXX-NT AD2 eBay find
Posted: Fri Oct 21, 2022 8:50 pm
by kzeppelin2
RogueIV wrote: ↑Sun Sep 18, 2022 10:45 pm
kzeppelin2 wrote: ↑Sun Mar 20, 2022 7:00 pm
Does anyone know of any modern axle conversion methods for the AD2? I've found some that use the XXX-SCT parts but those are hard to find now as well. I'm just beginning my research now but figured I'd post here to see if anyone has ideas or has had recent success converting to front and rear hexs. Thanks!
rear is simple if it's pindrive, you just get some hexes. The front is the hard part but I devised a simple solution, adapters that fit in the JConcepts Mono 12mm hex wheels and make it so you can fit bearings into the wheels. It's over on Thingiverse (thing:5479821 just add this to the end of the URL, I can't post links yet.) if you have access to a 3d printer.
I use these on my electric converted XXX-NT
Another option might be to fit parts from the 22T to the truck but I haven't had a 22T around to take measurements from.
Or just run the RC10T wheels from JConcepts, offset isn't quite right but they'll still work.
Thanks for sharing the info on the wheel adapters. I may give them a shot. Link below for convenience.
https://www.thingiverse.com/thing:5479821