RC10Talk - The Net's Largest Vintage R/C Community

Had a jrx2 growing up and am looking to get a jrxt now.

How can you tell the difference between a jrx2 conversion to a jrxt vs an original jrxt chassis. I read that the angle for the jrx2 is 20 degrees vs 30 degrees for a jrxt in a previous forum. But how can you tell by looking at a picture? Is there something that gives it away.

Also from a collectors stand point how big of a deal is the jrxt chassis with the slot like the jrx pro vs. no slot for a jrxt.

Thanks

This is a restored jrx2 with a jrxt pro chassis with the hole...i filled it in

Looks great, thanks for the pic.

The chassis sides of a Pro / JRXT chassis are straight. They don't have that curve like the jrx2

JRX-T

scr8p wrote: ↑Sun Feb 21, 2021 7:03 pm The chassis sides of a Pro / JRXT chassis are straight. They don't have that curve like the jrx2

i curved that myself....used an original chassis as a template...used a die grinder with roloc surface disk to shape it. its all in my build thread.... this is the same chassis as above before i shaped and filled it

https://www.rc10talk.com/viewtopic.php?t=45684

Derek really worked hard on that chassis and breathed in alot of graghite with no mask to make that chassis look like a jrx2. Please read his build thread.

Thanks guys for that information. I learned a lot. And great work on that chassis