- RC10 Graphite: a runner with long printed arms -

[Asso_man!]

Cool build David. I'm keeping my fingers crossed that the printed parts hold up for you.

Thanks Jason, I will report back here soon hopefully as spring is coming and the track is reopening. I haven’t had any track time for 15 years so you can be sure these parts will be properly tested

[Asso_man!]

Well that didn’t hold very long first flip and KAPOW!
I guess I need to find a better solution for rear hubs and universals. Might go the RPM/Dynotech route for the rear. Has any new solution been found recently with off the shelf/easy to source parts to use modern wheels?

[jwscab]

do those rear hubs have the same geometry as the regular rc10 hubs? if they are, you can just ream the standard parts, hell, the re-release hubs are a loose fit on the standard bearings, so they might just work as is.

otherwise, with the metric axles, look into later b6/b7 and yomoko cars for a hub that might work, with a simple metric bearing.