Page 1 of 1

KO-PROPO CX-7 esc

Posted: Thu Jun 13, 2019 1:15 pm
by dinglem
Hi all,

I can't remember whether I have posted this up before or not, but a quick search comes up with very little about this so I thought I would post it up.

I picked this up from a friend a while back. He likes his Lipo/brushless gear so anything out of date to him gets thrown my way. He had some old brushed motors which he gave me and this was in the bag along with them.

It looks in fantastic shape, it looks brand new, but I honestly cannot recall these from bitd (certainly not in the UK anyway). One guy on a Fb forum that I know says they didn't really get too far out of Japan so were rarely seen.

Does anybody have any info or a manual for these? Approximate dating etc...? I would like to install it and use it for vintage racing if at all possible, assuming it is of a decent enough spec.

At the risk of sounding like a muppet, what's the 2 pin plug thing for at the end? Am i missing something?
62942858_1344208932398674_8939724730110312448_n.jpg
63619934_1267783133379178_7464621025502691328_n.jpg

Re: KO-PROPO CX-7 esc

Posted: Fri Jun 14, 2019 4:33 am
by dinglem
OK so KO themselves just emailed me to say they don't have a manual available for this either!!!

But they did date it as 1993.

Then I got sent a link to this info from a guy in Japan:-
cx7 specs.jpg

So I am starting to get somewhere at least..... must be pretty rare I guess.

Re: KO-PROPO CX-7 esc

Posted: Fri Jun 14, 2019 8:27 am
by jwscab
That connector 2 pin looking thing is probably a solder/pop fuse thing.

Re: KO-PROPO CX-7 esc

Posted: Sat Feb 15, 2020 2:51 pm
by dinglem
Mag advert from November '94 Radio Race Car (UK), so useful for dating purposes 8)
86426424_10158274505467658_3509835583390220288_o.jpg