RC10Talk - The Net's Largest Vintage R/C Community

I just recieved an email notice then checked AE's website to confirm.

https://www.teamassociated.com/parts/details/6867-ASC6867-rc10wc_decal_sheet/

Going forward, I guess we'll need to buy this decal set from MCI.

https://mciracing.ca/products/blank-8c00eaf5-7cb0-4b68-b896-2ca767594a45

Is there another option?

I'm glad I didn't cut mine or used anything from it. I'll put it away for 20 years and then see what it's worth!

I guess those little aluminum washers are gone now.

"This is an automated e-mail from Team Associated. You had requested to be notified when a specific item came back in stock.

Part #: 6936 (Washers, #4, aluminum)
Item Status: This item has been discontinued"

Is there a suitable replacement available anywhere?

XLR8 wrote: ↑Thu Sep 27, 2018 4:38 pm I guess those little aluminum washers are gone now.

"This is an automated e-mail from Team Associated. You had requested to be notified when a specific item came back in stock.

Part #: 6936 (Washers, #4, aluminum)
Item Status: This item has been discontinued"

Is there a suitable replacement available anywhere?

Is this the same washer? [urlhttps://www.fastener-express.com/4-flat-washer-aluminum-Qty.-100.aspx][/url] I've been buying screws and lock nuts from them for quits some time.

NomadRacer wrote: ↑Thu Sep 27, 2018 5:30 pm

XLR8 wrote: ↑Thu Sep 27, 2018 4:38 pm I guess those little aluminum washers are gone now.

"This is an automated e-mail from Team Associated. You had requested to be notified when a specific item came back in stock.

Part #: 6936 (Washers, #4, aluminum)
Item Status: This item has been discontinued"

Is there a suitable replacement available anywhere?

Is this the same washer? [urlhttps://www.fastener-express.com/4-flat-washer-aluminum-Qty.-100.aspx][/url] I've been buying screws and lock nuts from them for quits some time.

If my calipers are accurate, they're maybe a couple thousandths larger on OD and thickness but certainly close enough. And they're about one third the cost ($3.99/12 vs. $11.65/100). Thank you Nomad, I had checked fastener-express but somehow I missed these.

Your very welcome sir. I plan on getting a pack when I run out of Associated washers. , On second thought, I think I'll not open the last 2 packs of AE washers, might be some "gold" to be had for them someday.

And I got an Associated email also

Part #: 6617 (RC10 Diff Tube with Hub)
Item Status: This item has been discontinued
Rats

Chuck

AE must be dropping parts/hardware that's low stock and not selling.

I guess if you can find them, buy them.

This just in...

TeamAssociated.com <[email protected]>

Mar 26 at 12:01 PM

This is an automated e-mail from Team Associated. You had requested to be notified when a specific item came back in stock.

Part #: 4449 (Aluminum Locknuts, 4-40, small pattern)
Item Status: This item has been discontinued

To view this item online, visit:
https://www.teamassociated.com/parts/details/4449/

--------------------------
This e-mail has been sent at your request. You will not receive any more notifications for this item unless you re-request it

I'm expecting to see a whole bunch of these emails in the next few weeks on all the parts I have emails on. Sad, really.

AE's list of discontinued parts grows.

Part #: 6225 (Steering Blocks, white)

Bodies are gone:

Part #: 6121 (Viper Buggy Body, clear)
Part #: 6160 (Protech Buggy body, clear)
Part #: 6162 (RC10 Turbo Mirage Body)
Part #: 6181 (High Down Force Wing Kit)

Is there anyone else making the original Protech body?

XLR8 wrote: ↑Thu Jul 18, 2019 11:14 pm AE's list of discontinued parts grows.

Part #: 6225 (Steering Blocks, white)

Bodies are gone:

Part #: 6121 (Viper Buggy Body, clear)
Part #: 6160 (Protech Buggy body, clear)
Part #: 6162 (RC10 Turbo Mirage Body)
Part #: 6181 (High Down Force Wing Kit)

Is there anyone else making the original Protech body?

I assume you checked with TBG and Penguin?

Rear arm mounts gone also.......................................... they even got rid of #3897 Pivoting body mounts something I liked alot.....and #3990 FT Hard ano shock bodies

yeah, that's probably about it for that........start collecting if you are using them as runners....