Page 1 of 1

Marui Samurai build

Posted: Wed Oct 25, 2017 3:36 pm
by eugine
Hello

First sorry for the English but I am French :)

This is my first thread on RC10Talk and I choosen to present you my Samurai build.

I bought 2 models plus some NIP parts as some where weared on both :(

Here we go :

Polishing the FWD plate

Image


Image

Image

The shocks are long to polish as there are many corners

Image

As per manual I started with FWD diff with some NIP parts

Image


Image

Image

Image

The FWD diff is NIP

Image


Image

Done but something is missing between FWD and rear :)

Previous diff is cracked near little black scerws. Do not tighten a lot.

It will stay on a shelf as it is very weak but I put a correct era option: ball bearings :)

Image

FWD is done :smoke:

Image

It is not so easy to build the FWD as there are a lot of parts going into others.

Almost finished with genuine mechanical speed controller and associated lots of wires :)
The two halves chassis are NIP as all were broken at shocks or rear diff attachements.

Image

The driver:

Image

Image

I couldn't install the BIGGG ACOMS receiver and the driver. Maybe that's why the driver was not there when I bought the buggy.


Image

Instead of doing 100% box art I added a touch of green.

Image

Image

It is was a very nice model produced by Marui. One of the most beautiful of RC in my opinion with the Scorpion and the Javelin

I hope you will like it also.
See ya...

Re: Marui Samurai build

Posted: Wed Oct 25, 2017 3:48 pm
by tamiyadan
.

Re: Marui Samurai build

Posted: Wed Oct 25, 2017 4:54 pm
by badnat
Hello Eugine!
Welcome on RC10T ... nice car by the way :D
A+
Nat

Re: Marui Samurai build

Posted: Wed Oct 25, 2017 5:07 pm
by Coelacanth
Nice restoration. I've always liked the Samurai, the proportions just seemed correct to my eyes, like the Javelin. (*Not* like the Hotshot or Galaxy!) I also always liked the slotted wheels; my 1970 Charger had similar slotted mags when I first bought it as a 19-year-old...WAY too many years ago... :mrgreen:

Re: Marui Samurai build

Posted: Thu Oct 26, 2017 2:02 am
by eugine
Thank you all!

Re: Marui Samurai build

Posted: Thu Oct 26, 2017 2:08 am
by eugine
Coelacanth wrote: Wed Oct 25, 2017 5:07 pm Nice restoration. I've always liked the Samurai, the proportions just seemed correct to my eyes, like the Javelin. (*Not* like the Hotshot or Galaxy!) I also always liked the slotted wheels; my 1970 Charger had similar slotted mags when I first bought it as a 19-year-old...WAY too many years ago... :mrgreen:
The same for me Coelacanth. It is so close to a static model! It was a time where esthetics was more important than aerodynamic performances. Now some models are really awfull in my taste like those with fwd driver cabin.

Re: Marui Samurai build

Posted: Sun Oct 29, 2017 7:32 am
by Dadio
Such a beautiful car , well done , it's a pity it's shelf bound but in this case I understand , such a shame they were so fragile , I always loved how they looked but never saw one in the flesh.

Re: Marui Samurai build

Posted: Sun Oct 29, 2017 1:29 pm
by eugine
In reality I couldn't help running it before the build. It ran pretty good on a flat but sliperry surface. But it has tons of understeering. Maybe that's why also it couldn't face to Optimas.

Re: Marui Samurai build

Posted: Sun Oct 29, 2017 4:22 pm
by Dadio
eugine wrote: Sun Oct 29, 2017 1:29 pm In reality I couldn't help running it before the build. It ran pretty good on a flat but sliperry surface. But it has tons of understeering. Maybe that's why also it couldn't face to Optimas.
He he glad to hear that we are all human and find it hard to resist at least one drive :mrgreen: . I think the Optima was a step ahead in design , I raced against one a lot bitd with my very modded Hot Shot , apart from the chain stretching or being knocked out of adjustment I had a very hard time of it , strangely chatting with the driver recently he was envious of the shaft drive on the Hot Shot being so reliable and he dreaded the constant chain tinkering the Optima needed so it's all perspective I guess.

Re: Marui Samurai build

Posted: Sun Oct 29, 2017 4:37 pm
by orangemazda
Very cool car!

When I was a young boy, I got a Samurai in a lot of RC stuff I bought. It was not complete and after a while I ended up throwing it away! That’s one of two dumb RC moves I remember doing over the years. The other was throwing away an original Kyosho Javelin orange roll cage. :roll:

Re: Marui Samurai build

Posted: Mon Oct 30, 2017 3:03 pm
by eugine
Dadio wrote: Sun Oct 29, 2017 4:22 pm
eugine wrote: Sun Oct 29, 2017 1:29 pm In reality I couldn't help running it before the build. It ran pretty good on a flat but sliperry surface. But it has tons of understeering. Maybe that's why also it couldn't face to Optimas.
He he glad to hear that we are all human and find it hard to resist at least one drive :mrgreen: . I think the Optima was a step ahead in design , I raced against one a lot bitd with my very modded Hot Shot , apart from the chain stretching or being knocked out of adjustment I had a very hard time of it , strangely chatting with the driver recently he was envious of the shaft drive on the Hot Shot being so reliable and he dreaded the constant chain tinkering the Optima needed so it's all perspective I guess.
We are never happy with what we have and always looking to the neighborhood stuff. Perfect world don't exists 😃

Re: Marui Samurai build

Posted: Mon Oct 30, 2017 3:07 pm
by eugine
orangemazda wrote: Sun Oct 29, 2017 4:37 pm Very cool car!

When I was a young boy, I got a Samurai in a lot of RC stuff I bought. It was not complete and after a while I ended up throwing it away! That’s one of two dumb RC moves I remember doing over the years. The other was throwing away an original Kyosho Javelin orange roll cage. :roll:
😃😃
I did some crazy deals that I regret also. 😃
Fortunately Kyosho released a Javelin for you😃😃

Re: Marui Samurai build

Posted: Tue Oct 31, 2017 7:37 am
by Lonestar
Chouette caisse!

The samurai was quite breakthrough at the time, the lightest car on the market!

And those rims were the nicest ever done...

Well done!

a+
Paul