Page 1 of 1
TRC/Composite Craft Lynx II Elite LTO Rear Axle Question
Posted: Fri Aug 18, 2017 9:58 pm
by PrincessShandi82
I'm having problems remembering the original Lynx I had. Now if memory serves me right, I had a rear axle just like the 10LSS. And if I remember right both axles were interchangeable. Someone please help me if I'm remembering this wrong and set me on the right path for the correct axle and hubs.
Re: TRC/Composite Craft Lynx II Elite LTO Rear Axle Question
Posted: Sat Aug 19, 2017 12:08 am
by Phin
The axles and hubs were different. You might be able to fit a 10LSS axle on an Lynx since they both use 1/4" bearings but the offset of the wheels might not be right. Lynx used the same rear axle and left hub as Bolink cars. If you've got a wide car you'll need the Lynx diff hub but if you got a narrow car I think you can also use the Bolink diff hub...though I'm not 100% on that.
Plenty of correct Lynx hubs on eBay.