RC10Talk - The Net's Largest Vintage R/C Community

Does anyone know if these will work with 82* 4-40 flat head screws? I need a couple blue ones.

https://www.amainhobbies.com/team-associated-blue-countersunk-washer-10-asc89229/p17027

They are most likely for metric hardware which will be 90 degrees across the board. They will fit, but the screw will have to sink lower to make the washer tight, so if you put it on a plate for instance, you would have to open up the hole in the plate a smidge.

well it was added to amains website back in 2007 before associated was using metric if not call them and ask.

I was just looking at the compatible models and I think most are metric.....

I found another brand in a smaller package and went those. I only need 2, and since I really don't like them, I don't want a stack of them laying around. And the place had a small pack of 3/16 blue aluminum lock nuts that I needed too.

scr8p wrote: ↑Mon Apr 10, 2017 9:32 pm I found another brand in a smaller package and went those. I only need 2, and since I really don't like them, I don't want a stack of them laying around. And the place had a small pack of 3/16 blue aluminum lock nuts that I needed too.

Care to share whom you ordered from please?

Thank you

https://www.teamseriousracing.com/

Now obviously, buying in a larger bulk from Fastener Express or somewhere like it would've been a better deal. But I'm not into the colored hardware, and don't need 25 of each laying around. And shipping was only like $2.00 for what I ordered.

For what it's worth they work fine with 82* hardware.

Hobao/Ofna make some silver ones if colors don't suit your fancy, and if you like colors look into 3racing as they are cheap.


FWIW I liked the old Trinity countersunk washers...

I have a ton of those under the Factory Works brand as well

Red, blue, and silver for socket head, button head, and flat head

GoMachV wrote: ↑Tue Apr 11, 2017 9:49 am I have a ton of those under the Factory Works brand as well

Red, blue, and silver for socket head, button head, and flat head

Now that you mention it, i do remember seeing them on the old site.

I kinda figured you needed a specific style, mine are fancy

Yeah, I went back on the old site and looked. I wouldn't have been able to use those anyway.