Albino Mashup/Mutt
Posted: Thu Mar 24, 2016 3:06 pm
The question is obvious, but what´s the answer 
Todd
RC10Talk - The Net's Largest Vintage R/C Community
Albino Mashup/Mutt
Page 1 of 2
Re: Quiz time
Posted: Thu Mar 24, 2016 7:30 pm
Looks like Jeff has been busy but don't provide answers when I don't know the questions
Todd
Todd
Re: Quiz time
Posted: Thu Mar 24, 2016 7:59 pm
I didn't do it! I sent black stuff not natural. I'm thinking he cheated on me :lol:
Hey Dennis, what shocks are going on that?!
Hey Dennis, what shocks are going on that?!
Re: Quiz time
Posted: Thu Mar 24, 2016 8:13 pm
its a prototype I WANT IT 
Re: Quiz time
Posted: Thu Mar 24, 2016 8:39 pm
I'm clueless on this but I love the color of the chassis plates (Hint, hint... Jeff) 
This is going to look sweet!
This is going to look sweet!
Re: Quiz time
Posted: Fri Mar 25, 2016 5:13 am
Sod the chassis look at that motor mount that's a thing of beauty!!!! 
who made that and where can I get one
who made that and where can I get one Re: Quiz time
Posted: Fri Mar 25, 2016 1:58 pm
My bet is on gpm. They did the anodize and chamfer afterwards stuff a lot
Re: Quiz time
Posted: Fri Mar 25, 2016 2:19 pm
I thought I saw some team suzuki motor mounts that looked like that. If not Suzuki, then I guess gpm also. Actually, I thought some of the factory works motor mounts looked like that too but in grey or silver. Whats the chassis going to be? Custom? Based on 91 92 93 dimentions?
Re: Quiz time
Posted: Fri Mar 25, 2016 2:39 pm
Peakey was right about the motormount being the thing in question - Mr. ED has the maker right.
But it´s not meant for Yokomo and the reason why I cheated on Jeff
The mounting holes are of compared to the Yokomo mount so I had to do an new chassis and topdeck without motormount holes.
The shocktowers are going to be 91 at the front and a homegrown 93 at the rear.
As for shocks, I´ve got two setups in mind - either AE or Academy purple shocks ala Option house golds.
If possible, I´ll try to find some sort of natural nylon arms for it.
But it´s not meant for Yokomo
and the reason why I cheated on Jeff The mounting holes are of compared to the Yokomo mount so I had to do an new chassis and topdeck without motormount holes.
The shocktowers are going to be 91 at the front and a homegrown 93 at the rear.
As for shocks, I´ve got two setups in mind - either AE or Academy purple shocks ala Option house golds.
If possible, I´ll try to find some sort of natural nylon arms for it.
Re: Quiz time
Posted: Fri Mar 25, 2016 3:22 pm
What's the diameter of those shocks?
Looking great Dennis!
Looking great Dennis!
Re: Quiz time
Posted: Fri Mar 25, 2016 3:45 pm
Just about 9,987 mm bore
Re: Quiz time
Posted: Sat Apr 30, 2016 12:25 pm
Update
Re: Albino Mashup
Posted: Sat Apr 30, 2016 1:19 pm
sexy!
Re: Albino Mashup
Posted: Sat Apr 30, 2016 8:14 pm
Awesome
Reminds me of milk chocolate
Reminds me of milk chocolate
Re: Albino Mashup/Mutt
Posted: Sun Mar 11, 2018 8:39 am
870 chassis blank by Jeff, formed into Works ´93 chassis.
HotDog front and rear bulkhead (no YR4 bumper cutout at the front)
Fastrax motormount
Works ´92 rear shockmount, fibrelyte Works 91/92 front shockmount.
Works rear arms and carriers - front arms are RPM rears for 870, modified to accept CAT 2000 C-hubs.
I hope to build some diffs from GPM delrin pulleys and perhaps Academy outdrives. (need to save the nip´s for the ´93 build )
Layshaft is a random, cutdown, 5mm axle with 4mm threads.
Inner plate is original Yokomo T.C.S (which actually is the same as an inner plate from a Stealth with an added belt pulley and remachined groove for the 2,5mm crosspin)
Outer plate is Kyosho ZX-S, with added groove to hold the pad.
Front pulley is std. Yokomo
HotDog front and rear bulkhead (no YR4 bumper cutout at the front)
Fastrax motormount
Works ´92 rear shockmount, fibrelyte Works 91/92 front shockmount.
Works rear arms and carriers - front arms are RPM rears for 870, modified to accept CAT 2000 C-hubs.
I hope to build some diffs from GPM delrin pulleys and perhaps Academy outdrives. (need to save the nip´s for the ´93 build
)Layshaft is a random, cutdown, 5mm axle with 4mm threads.
Inner plate is original Yokomo T.C.S (which actually is the same as an inner plate from a Stealth with an added belt pulley and remachined groove for the 2,5mm crosspin)
Outer plate is Kyosho ZX-S, with added groove to hold the pad.
Front pulley is std. Yokomo