RC10L3T Racers
Posted: Tue Dec 01, 2015 1:30 pm
Made a deal with a friend of mine who had both these awesome cars just sitting for over 10 years that I had to have so I bought them to try and get a pan car class going again at the local track! One of them is brand new never seen the track and the other was lightly used but pretty much brand new. This guy is super ocd clean freak just like me so his stuff is mint.

I started out with the used car which will be my racer for now till the class gets going. I added the CRC lowered billet pod plates, some blue anod countersink washers and some misc bits to it but its pretty much stock. I also used a first gen B44 lipo tray and after some cutting I drilled and bolted it to the chassis to accept 2 cell lipo saddles. Ill use strapping tape to hold them down. For electronics I used an Airtronics radio and receiver, Speed Passion Citrix 17.5 system "for now"

Topped it off with a Racers Choice 200mm body!


I started out with the used car which will be my racer for now till the class gets going. I added the CRC lowered billet pod plates, some blue anod countersink washers and some misc bits to it but its pretty much stock. I also used a first gen B44 lipo tray and after some cutting I drilled and bolted it to the chassis to accept 2 cell lipo saddles. Ill use strapping tape to hold them down. For electronics I used an Airtronics radio and receiver, Speed Passion Citrix 17.5 system "for now"

Topped it off with a Racers Choice 200mm body!
