RC10Talk - The Net's Largest Vintage R/C Community

Hello everyone -

I recently came across my RC10 Championship Edition car from the 90's and have decided to refresh it a bit and get it running again. The first thing I'd like to do is to add a bearing kit to the car. Right now it has all of the factory stock bushings installed.

I started looking at bearing kits, but I haven't been able to find a kit that seems to be specifically tailored to my car. I grabbed the instruction manual and have found the following bushing part numbers:

#6597 5/32x5/16
#6597
#6864
#6598
#6387
#6864

Which bearing kit will fit my car? I believe it is equipped with a stealth transmission. All of the plastic parts are black as opposed to the white plastic pieces I've seen in most photos that I've come across.

Thanks in advance, and I hope this info helps find me the correct kit.

Ryan

Go to Avid RC - they have kits for the RC10

If you go through BOCA use the kit for the RC10T since they have it with flanged bearings for they rear hubs, unless they have actually listened to me and checked with AE and updated it with the 1/4 x 3/8 unflanged.