RC10Talk - The Net's Largest Vintage R/C Community

I found a NOS 81 tooth in my box and picked this up...
http://www.amazon.com/gp/product/B000X4MXIU/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

I also have an 87 and 90 for the RC10T but what other options are out there for the original stealth setup? Will the TC3 stuff work? Seems like a lot of options...
Like this for example?
http://www.teamassociated.com/parts/details/3923

Thanks

Off the top of my head, 78, 81, 83, 85, 87. (black, and white, with 2-hole, and multi-holed) Might be more, but I think that was listed in the catalog bitd.... 81's for the 10's, and 87's for the T's

Any of the gears from the kimbrough gears from their website would work if your running the original slipper...

http://kimbroughracingproducts.com/store/index.php?dispatch=categories.view&category_id=199

Any of the gears from the kimbrough site for B4 style dual pad slipper clutch...

http://kimbroughracingproducts.com/store/index.php?dispatch=categories.view&category_id=198

AE reproduction 81 tooth 48 pitch white nylon spur...

http://www.teamassociated.com/parts/details/6634/

Mark Westerfield wrote:Any of the gears from the kimbrough gears from their website would work if your running the original slipper...

http://kimbroughracingproducts.com/store/index.php?dispatch=categories.view&category_id=199

Any of the gears from the kimbrough site for B4 style dual pad slipper clutch...

http://kimbroughracingproducts.com/store/index.php?dispatch=categories.view&category_id=198

AE reproduction 81 tooth 48 pitch white nylon spur...

http://www.teamassociated.com/parts/details/6634/

That's awesome thanks!