Page 35 of 40
Re: Ten4: the 4WD RC10 project
Posted: Wed Nov 18, 2015 7:46 pm
by Phin
Looking that good is definitely worth losing the "second or two advantage" a cab-forward body gives you.
Re: Ten4: the 4WD RC10 project
Posted: Wed Nov 18, 2015 7:50 pm
by GoMachV
Well, it was worth a try
the wheel diameter is too small for our huge hubs. Need to get Brian to shrink em for me
It is really wide In the front, but looking at original pics of the MIP they were also
Re: Ten4: the 4WD RC10 project
Posted: Wed Nov 18, 2015 8:07 pm
by mk-Zero
Phin wrote:Looking that good is definitely worth losing the "second or two advantage" a cab-forward body gives you.
Hahaha, I'm running a Viper body now, so no loss
Re: Ten4: the 4WD RC10 project
Posted: Fri Nov 20, 2015 11:53 pm
by pumpkinfish
I just listed my tensioner for sale for the carbon fiber/composite chassis conversions. I also have another model that is centered (slightly more forward) that will give better belt wrap if needed. Both are listed for sale. I didn't offer polished because I thought it took away some detail in the teeth. You will need to tap the screw hole and lightly sand the post to fit in the bearing.
https://www.shapeways.com/shops/pumpkinfish
Re: Ten4: the 4WD RC10 project
Posted: Tue Dec 08, 2015 8:45 pm
by Ronbo
Couple questions, would this still be legal for vintage 4wd racing since its still a RC10?
And I think I missed it reading all 35 pages, but any differences in using the worlds car nose plate and tub? Im thinking about that and using my flat plate and nose plate for my MIP 4wd shelfer.
Re: Ten4: the 4WD RC10 project
Posted: Tue Dec 08, 2015 9:46 pm
by GoMachV
Worlds tub is fine but you need the uncut nose plate from a standard team or CE kit. Not sure on the vintage part, hard to say
Re: Ten4: the 4WD RC10 project
Posted: Fri Dec 18, 2015 2:20 pm
by wydraz
Re: Ten4: the 4WD RC10 project
Posted: Sat Dec 19, 2015 11:08 am
by mk-Zero
Man, that looks NICE!!!!
Re: Ten4: the 4WD RC10 project
Posted: Sat Dec 19, 2015 8:27 pm
by vintage AE
mk-Zero wrote:Man, that looks NICE!!!!
I know, eh?!?!
Re: Ten4: the 4WD RC10 project
Posted: Sun Dec 20, 2015 8:21 am
by wydraz
Thanks
Re: Ten4: the 4WD RC10 project
Posted: Sat Feb 27, 2016 12:54 pm
by Patriiick
Sorry to jump in so late, i was wondering if all non shapeways parts were still available from you guys ?
I;m especially thinking about the robinson pulleys, nose tubes and hardware kits ?
I m in europe and very cool and getting stuff from shapeways, but it s all the other bits i m worries about..
Thanks for all your help in advance !
Re: Ten4: the 4WD RC10 project
Posted: Sat Feb 27, 2016 12:59 pm
by mk-Zero
Yup, everything is still available
Please see the threads in my business section for details on the other parts. Feel free to PM me if you have any questions.
Re: Ten4: the 4WD RC10 project
Posted: Sat Feb 27, 2016 1:08 pm
by SnoopMaxx
Is that the standard length body ?
Re: Ten4: the 4WD RC10 project
Posted: Sat Mar 05, 2016 7:58 am
by wydraz
No, extended one.
Re: Ten4: the 4WD RC10 project
Posted: Wed May 18, 2016 12:32 pm
by mk-Zero
Here's a car I just finished for a customer. He wanted a roller with a black chassis and white plastics, so I built him this SWB version based of a World's rere chassis. Almost everything on the car is brand new, except the white front arms and the rear Stealth. The car came out really nice, I think he's going to be happy.
