RC10Talk - The Net's Largest Vintage R/C Community

well maybe THIS ONE will be my last rc10t so far have added A&L wheels, nib A&L trans, A&L frt and rear shock towers. waiting on a few more parts to complete.

Sweet

Now you need a blue anodized motor plate

Dave.

And some Pro 90's for the rear wheels

Dave.

got the 90's on the way

That's funny so have I

Dave.

So you balancing out your too narrow Andy's truck with a too wide A&L truck?

Those are monster truck wheels for converting buggies. You need to find the later style wheels.

You mean this truck

This is Sweeet

Dave.

yup thats it

Phin wrote:So you balancing out your too narrow Andy's truck with a too wide A&L truck?

Those are monster truck wheels for converting buggies. You need to find the later style wheels.

well if u consider a 1/2" wider than a stock rc10t, than ok

Better check your alignment. It looks like you've got a bit too much toe-in.

On a more serious note, a set of blue nose braces would look good, as would a blue screw set.

hugger19 wrote:

Phin wrote:So you balancing out your too narrow Andy's truck with a too wide A&L truck?

Those are monster truck wheels for converting buggies. You need to find the later style wheels.

well if u consider a 1/2" wider than a stock rc10t, than ok

It's a ~1/2" wider per side difference between monster truck conversion wheels and 10T wheels so about 1" +/- wider than a stock 10T.

stock rc10t is 12" mine 12 1/2" front. rear stock 12 1/2" mine 13 1/4"

few more parts. the a&l steering parts look the same as the rc10 ones? ordered from mr lane it said for rc10t.

I don't think he ever had a longer truck version. The buggy/T2 length is preferred anyway

Hi,

Did you get part A&L part #'s 1085 & 1185 are listed for RC10T:?:

1080 & 1180 are for RC10.

Dave.