My RC12L Project
-
- Approved Member
- Posts: 33
- Joined: Wed Jun 23, 2010 5:13 pm
My RC12L Project
Dear Members,
a few months ago I received a special package from a old race buddy, I recently met again. He offered me his 12L that was put on the shelf more than 20 years ago, I actually got the car for free, as log as he and his son who are racing together in the 1/10th ic class could give the car a test drive when I was done with my restoration. Off course I didn't have to think long about he offer ;o)
This is what I've received:
The car was complete but needed a good cleaning and some parts to be exchanged, 1 very cool item on the car is the Christian Keil one piece rear motor pod ;o)
After cleaning thoroughly disassembly went quickly without trouble, and the chassis was re assembled and I had a very nice dejavu after so many years to work on a 12L again
The Novak M1c ESC was taken apart and a lot of debris fell out of the case, I replaced the wires and (the red color was not my favorite, but all I had in a longer length ;o)) the esc looked nice and fresh again, and I gave the heat sink some polishing while I was at it ;o)
The Servo that was in the car when I got it was a cheap Hype example and had to go, and in went a Futaba 132 that I had lying around.
The servo saver that will be replaced by a Kimbrough is a Tamiya entry version, and the steering rods that are also temporary are a Corally centerpoint steering set, these will go later to the original set up.
A receiver was fitted, Sanwa for now that will be replaced by a Novak receiver when it comes in.
And last but not least a motor was fitted, I found a nice Gold star Reedy that went straight in ;o)
The Keil Pushed Sanyo 1700 SCE packs that came along still held a charge and a quick wipe made them look good again,
Some back up newer cells were also soldered to be able to get some runtime
Tires were glued and trued and a xtra set of rear Green compound were found on the Bay
The original bod was fitted for the test drive @ my local track
The test drive went really well, I was carefull not to hit the boards, and the gearing was a little high, but I was amazed how the car felt on the high traction carpet, I will surely go out with the car again!
and off course a driver found its way
Latest addition is a new Associated Toj body that was a real joy to fit on the car, this time warp was a super experience since more than 20 years back I have cut and painted so many of them, but this one to me is very special
A body off shot
And a sneak peak of the Paint job it will get, a tribute to Kent Clausen
Next up are painting and decaling the body, sourcing the Kimbrough servo saver and track rods and off course that mint Novak receiver that will look so good alongside the M1c esc
Thanx for reading and I will update regularly
Cheers
Rob
a few months ago I received a special package from a old race buddy, I recently met again. He offered me his 12L that was put on the shelf more than 20 years ago, I actually got the car for free, as log as he and his son who are racing together in the 1/10th ic class could give the car a test drive when I was done with my restoration. Off course I didn't have to think long about he offer ;o)
This is what I've received:
The car was complete but needed a good cleaning and some parts to be exchanged, 1 very cool item on the car is the Christian Keil one piece rear motor pod ;o)
After cleaning thoroughly disassembly went quickly without trouble, and the chassis was re assembled and I had a very nice dejavu after so many years to work on a 12L again
The Novak M1c ESC was taken apart and a lot of debris fell out of the case, I replaced the wires and (the red color was not my favorite, but all I had in a longer length ;o)) the esc looked nice and fresh again, and I gave the heat sink some polishing while I was at it ;o)
The Servo that was in the car when I got it was a cheap Hype example and had to go, and in went a Futaba 132 that I had lying around.
The servo saver that will be replaced by a Kimbrough is a Tamiya entry version, and the steering rods that are also temporary are a Corally centerpoint steering set, these will go later to the original set up.
A receiver was fitted, Sanwa for now that will be replaced by a Novak receiver when it comes in.
And last but not least a motor was fitted, I found a nice Gold star Reedy that went straight in ;o)
The Keil Pushed Sanyo 1700 SCE packs that came along still held a charge and a quick wipe made them look good again,
Some back up newer cells were also soldered to be able to get some runtime
Tires were glued and trued and a xtra set of rear Green compound were found on the Bay
The original bod was fitted for the test drive @ my local track
The test drive went really well, I was carefull not to hit the boards, and the gearing was a little high, but I was amazed how the car felt on the high traction carpet, I will surely go out with the car again!
and off course a driver found its way
Latest addition is a new Associated Toj body that was a real joy to fit on the car, this time warp was a super experience since more than 20 years back I have cut and painted so many of them, but this one to me is very special
A body off shot
And a sneak peak of the Paint job it will get, a tribute to Kent Clausen
Next up are painting and decaling the body, sourcing the Kimbrough servo saver and track rods and off course that mint Novak receiver that will look so good alongside the M1c esc
Thanx for reading and I will update regularly
Cheers
Rob
RC10 gold tub
RC10T
RC10 Worlds
B44.1/B44.2
Yokomo Works '91
RC10T
RC10 Worlds
B44.1/B44.2
Yokomo Works '91
- SFC K
- Approved Member
- Posts: 1336
- Joined: Tue Nov 30, 2010 9:24 pm
- Location: Oakdale, MN
- Has thanked: 47 times
- Been thanked: 9 times
Re: My RC12L Project
Looks awesome and nice job on the restoration. The driver attached to the antennae is a nice touch. I dig the carbon fiber wheels disks you added to the wheels.
Jeff
- FullThrottleTXOutlaw
- Regular Member
- Posts: 13
- Joined: Wed Nov 12, 2014 7:13 pm
-
- Approved Member
- Posts: 33
- Joined: Wed Jun 23, 2010 5:13 pm
Re: My RC12L Project
It is nearing completement
Decals in:
Body painted up using rattle can and Masking tape:
Decals on:
Together with My Worlds RC10:
New Whell dots on:
I am very happy how it turned out
Still searching for a Novak Servo !
Cheers
Rob
Decals in:
Body painted up using rattle can and Masking tape:
Decals on:
Together with My Worlds RC10:
New Whell dots on:
I am very happy how it turned out
Still searching for a Novak Servo !
Cheers
Rob
RC10 gold tub
RC10T
RC10 Worlds
B44.1/B44.2
Yokomo Works '91
RC10T
RC10 Worlds
B44.1/B44.2
Yokomo Works '91
-
- Approved Member
- Posts: 104
- Joined: Fri May 29, 2015 5:33 pm
- Location: Singapore
Re: My RC12L Project
Very nice indeed. Am rekindling my love of all things associated and this is very sweet and an inspiration. Thanks very much.
Cheers. Harold.
My Vintage RC collection: http://www.tamiyaclub.com/showroom.asp?id=44535
My Blog: https://www.facebook.com/Rccarshed?fref=nf
My Vintage RC collection: http://www.tamiyaclub.com/showroom.asp?id=44535
My Blog: https://www.facebook.com/Rccarshed?fref=nf
- slotcarrod
- Approved Member
- Posts: 4415
- Joined: Tue Nov 25, 2008 10:57 pm
- Location: Calgary Alberta Canada
- Has thanked: 1 time
- Been thanked: 41 times
Re: My RC12L Project
That is very nice looking!
I am crying over the Lavco decals though, as I desperately need some white ones for a replica!
I am crying over the Lavco decals though, as I desperately need some white ones for a replica!
Rod Littau
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
Slotcarrod's Rumpus Room: http://www.rc10talk.com/viewtopic.php?f=77&t=16113
25 Years of the RC10: http://www.rc10talk.com/viewtopic.php?f=35&t=13059
- Asso_man!
- Approved Member
- Posts: 3959
- Joined: Thu Aug 03, 2006 7:49 am
- Location: EU
- Has thanked: 40 times
- Been thanked: 70 times
Re: My RC12L Project
Mmmmh sweet car and a classic livery ! Good job bringing back to life.
_____________________________________________
_____________________________________________
Come and visit the stable
_____________________________________________
Come and visit the stable
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute
Sign in
-
- Similar Topics
- Replies
- Views
- Last post
-
- 14 Replies
- 2280 Views
-
Last post by bearrickster
-
- 9 Replies
- 1481 Views
-
Last post by rooster
-
- 18 Replies
- 2853 Views
-
Last post by Raven519
-
- 24 Replies
- 2341 Views
-
Last post by RC10th
-
- 8 Replies
- 922 Views
-
Last post by GoMachV
-
- 0 Replies
- 683 Views
-
Last post by purpletimbo
-
- 6 Replies
- 1595 Views
-
Last post by drbelleville
-
- 16 Replies
- 2798 Views
-
Last post by ChisaiKuso
Who is online
Users browsing this forum: No registered users and 5 guests