Page 1 of 1
RC12LS standoff question
Posted: Sun Jul 20, 2014 2:21 pm
by V12
For completing a RC12LS project I need to know the length of some standoffs. These are the ones used for chassis brace and dampener assembly. Manual tells part# but not length.
I have some standoffs laying here without bag so don´t know if could be used or not.
Thanks
Re: RC12LS standoff question
Posted: Mon Jul 21, 2014 2:07 am
by Wazza22
Hey V12,
I have some at home, Ill check when I get home from work and let you know.
Cheers
Re: RC12LS standoff question
Posted: Mon Jul 21, 2014 4:38 am
by Niki
Found in my notes...
#4440 (29.2mm)
#4441 (12.6mm)
#4442 (19.8mm)
Re: RC12LS standoff question
Posted: Mon Jul 21, 2014 5:11 am
by Wazza22
Hi V12
Posts are as follows;
Two outer posts are 19.8mm
Centre post under brace is 12.6mm
Centre post above brace for damper springs and discs is 29.2mm
I hope that helps
Cheers
Re: RC12LS standoff question
Posted: Mon Jul 21, 2014 5:15 pm
by V12
Thanks guys, that helps a lot.