RC10Talk - The Net's Largest Vintage R/C Community

Hey fella's

I need help with either finding a part or a replacement.

I want to put the stock RC10 shocks on my restores and when I took apart the shocks some of the nylon washers that sit behind the C clip were bent or trashed.

Anyone know the part number for them? A compatible replacement?

I've searched for them but I haven't come up with anything.

I bought the shock rebuild kit but they are not in there either.

Thanks

Tom

For the bottom load gold shocks you can borrow the plastic washers (and retaining clips) from this Traxxas rebuild kit:

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXJJ17&P=ML


Then use the AE rebuild kit for the rest of the shock.

4187 or 6466 of these should work. 4187 are 1/8 id .030 thick nylon washers. 6466 is a kit different thickness washers. take a look on RC10.com web site for those part numbers.

Thanks guys.

The one from the Traxxas kit looks promising.

I'll look up the others. I have about 8-10 sets of shocks to rebuild.

I should have broadened my search to spacer

MIKE VALENTINE wrote:4187 or 6466 of these should work. 4187 are 1/8 id .030 thick nylon washers. 6466 is a kit different thickness washers. take a look on RC10.com web site for those part numbers.

I went and looked at these today at lunch.

The 4187 is smaller than the one I need I am pretty sure. 6466 is the plastic spacer set that goes on the inner shaft of the shock.

I'll have to keep looking I think or take a look at the Traxxas kit.

Several members have used the Traxxas washers successfully.

Yeah I'll check them out.

I didn't have the number at the time and this particular shop is set up for online sales so it's just a huge space with lots of drawers of parts. I'd still be there.