RC10Talk - The Net's Largest Vintage R/C Community

can anyone with a b4 measure the distance from the center of the left rear outer hinge pin, to the center of the right rear outer hinge pin? with the arms level. i'd appreciate it.

thanks.

Hi scr8p, By my reckoning it is about 84mm.I hope that helps.

Moggie XL wrote:Hi scr8p, By my reckoning it is about 84mm.I hope that helps.

i have a feeling that would be the length of just one arm. i need the measurement from the left outer hinge to the right outer hinge. total width of the car in the rear.

i think that 84mm would only be for 1 arm thats like 3.3 inches
i know you asked for b4 measurements, but in case you were wondering about a b3 i know thoes measurements.
the total distance between both the rear outer hinge pins center to center with 0 degree rear arm mounts installed is 6 15/16 inches or 176.21mm. this distance of course will increase if using 1.5 degree rear arm mounts.

Very sorry 184mm is what I should have written.

Moggie XL wrote:Very sorry 184mm is what I should have written.

that's alright. thanks.

man, 90+ views, and only one person with a b4 replies?

that car must suck. no else has one.

It is not the best looking buggy associated ever made but on the track there's nothing even close.

scr8p wrote: that car must suck. no else has one.

I almost bought a T4 just because it still had the Cadillac address on the box, although it was under a Commercenter sticker...



Whacha doin' with those measurements..?

I don't have a standard B4 built up It's on the list of things to do.

I do have an X-6 and an Atomic Carbon S2 though

G

B3 here or I would have lent you a hand.
Sorry.

No B2,T2,B3,T3,B4 or T4 in my garage maybe I should do something about that

i'm just being capt. ball buster with the "the b4 must suck" comment.

Whacha doin' with those measurements..?

it's a super duper secret. shh.................

scr8p wrote:....it's a super duper secret. shh.................

You sound like me. Hold all the details till it is done them BLAMMM!!! Sit back and watch the jaws drop.
Well, I have not had a chance to make jaws drop yet. but one day I will actually finish a custom and BLAMMM!!!
Oh yeah baby. One day.