Page 1 of 1
Burns chassis info??
Posted: Fri Jul 05, 2013 11:05 pm
by urban hype
Hello All, I just added a Burns to my collection. If I remember correctly the original Burns chassis was basic satin coated silver. This car's chassis has a brownish colored anodizing on it. I seem to vaguely remember that there was an optional chassis for this car. Can anyone verify or disprove that there was there an optional chassis for the Burns?
Re: Burns chassis info??
Posted: Sat Jul 06, 2013 12:35 am
by DennisM
The chassis on Your picture is what I would call satin?
Kyosho had the BSW7 as optional chassis, it´s thicker and holes counter sunk - Same colour though.
Optima Mid turbo and the SE came with a brownish chassis.
Re: Burns chassis info??
Posted: Sat Jul 06, 2013 2:48 am
by Bormac
You should talk to Marwan as he is quite knowledgable on these cars. Also Roger (Highway Racer) has been a great source for me on these models.
I really dig those yellow wheels
Re: Burns chassis info??
Posted: Sat Jul 06, 2013 7:25 am
by Chris K
Can we see the rest of the car please/???

Re: Burns chassis info??
Posted: Sat Jul 06, 2013 9:09 am
by urban hype
You should talk to Marwan as he is quite knowledgable on these cars. Also Roger (Highway Racer) has been a great source for me on these models.
Thanks for the info J.M. is Marwan on this board? I know of his repro bodies and his website. Should I just email him?
Can we see the rest of the car please/???

There are some more pics of my cars in my other thread that can be found here.
http://www.rc10talk.com/viewtopic.php?f=30&t=31466&start=30
Re: Burns chassis info??
Posted: Sat Jul 06, 2013 7:35 pm
by highwayracer
My burns has a silver chassis and my buddy's turbo burns has the bronze chassis (counter sunk). I've also seen the bronze chassis (non counter sunk) on different cars that I've owned and a silver counter sunk chassis on a turbo burns. I think there could be 4 different chassis out there:
I have a feeling your chassis is slightly thicker than the standard silver.
http://www.tamiyaclub.com/pictureframe.asp?t=n&id=img4547_05042010102235_4.jpg
Regards,
Roger
Re: Burns chassis info??
Posted: Sun Jul 07, 2013 12:36 am
by urban hype
Highwayracer my chassis looks just like the one in your link. The thickness of my chassis is 2.65mm measured with my digital caliper. Why I am interested in the chassis is that if I remember correctly that the optional chassis had a slightly longer wheel base (5 or 6 mm). As I now have both the burns and the Turbo Burns I can tell you for sure that there is more than just countersinking. The layouts is slightly different between the Burns and the Turbo Burns. The wheel base is longer on the Turbo Burns.
J.M. or Highwayrace if you have an opportunity to measure the thickness of you chassis please post it for me . I would really like to compare the results. Special or not I am going to clean up this car and then drive it like I stole it at the track!!!
Re: Burns chassis info??
Posted: Sun Jul 07, 2013 12:48 am
by Bormac
I have both a Burns and the Turbo Burns. Indeed the Turbo Burns has the longer chassis and if my information is correct then it is the same used on the first Inferno also.
I will need to confirm the measurements when I return home from a visit away with the relo's.
All I want to know is, how attached are you to the yellow rims? I have been wanting a set in yellow.
Re: Burns chassis info??
Posted: Sun Jul 07, 2013 8:50 am
by urban hype
J.M. wrote: Indeed the Turbo Burns has the longer chassis and if my information is correct then it is the same used on the first Inferno also.
Unfortunately the color is the same but that is all that is the same between the Inferno and the Turbo Burns. The layout is totally different between the two cars. There was an optional blue chassis for the Inferno that was only offer to the Kyosho USA team over here
J.M. wrote:ll I want to know is, how attached are you to the yellow rims? I have been wanting a set in yellow.
.
I saw in your Burns electro conversion thread that you have all sort of goodies. I am sure that something can be worked out

Re: Burns chassis info??
Posted: Wed Jul 24, 2013 5:22 pm
by maruirc
J.M. wrote:I have both a Burns and the Turbo Burns. Indeed the Turbo Burns has the longer chassis and if my information is correct then it is the same used on the first Inferno also.
I will need to confirm the measurements when I return home from a visit away with the relo's.
All I want to know is, how attached are you to the yellow rims? I have been wanting a set in yellow.
Ther are 4 style chassis's for the Burns: origional , satin and recoil cut out and a crome one that came with a usa-1 nitro. I have them all. The chassis for the inferno's are comlpetly different. The chassis for the T Burns is slightly longer and has countersunk holes. I own the Burns , T Burns Usa-1 nitro crusher, Inferno and DX , Inferno limited 2 , Inferno ST. The landmax is also in the same family.
Re: Burns chassis info??
Posted: Wed Oct 30, 2013 10:51 am
by maruirc
I found a composite chassis by Dutatrax for the T burns.

Re: Burns chassis info??
Posted: Wed Oct 30, 2013 3:19 pm
by Bormac
maruirc wrote:I found a composite chassis by Dutatrax for the T burns.

Oh wow! I'd love to get my hands on one of those.
Re: Burns chassis info??
Posted: Thu Oct 31, 2013 4:12 pm
by tamiyadan
.
Re: Burns chassis info??
Posted: Tue Nov 05, 2013 9:05 am
by maruirc
Your talking about the T burns. The Burns dx didn't have bearings and had a stock chassis. None of the kits had hardened gears or steel main gear or metal brakes. Those were upgraded parts BSW.