Poor attempt at a WOIN
Posted: Sun May 26, 2013 7:16 pm
My poor attempt at a WOIN. It's a TQ chassis with kyosho shocks. I'm currently using a HW esc with a 2500kv HW BL motor. It not super fast, but it'll done for now. I do plan on using a 14x2 brushed with nimh batteries of course. 
The front tower is a "cut up" B3 tower bolted to the front blocks. I used B3 25*caster blocks with RC10 inline spindles and long FT blue axles. They don't appear to be the long GT axles though. The spindles were raised all the way up with shims. I get zero bump steering. My ride height is approx. 20mm front and back and 250mm wide in front and 248mm in back. I'm planning on modding the front nose to use a 10T tower and bulkhead with Klien arms both front and back. The current tires were only used to test it down the street. Comments, concerns, suggestions are welcomed. Not sure how it'll do at the track, but I should know something next week, if we don't get anymore rain! Yucky.
The front tower is a "cut up" B3 tower bolted to the front blocks. I used B3 25*caster blocks with RC10 inline spindles and long FT blue axles. They don't appear to be the long GT axles though. The spindles were raised all the way up with shims. I get zero bump steering. My ride height is approx. 20mm front and back and 250mm wide in front and 248mm in back. I'm planning on modding the front nose to use a 10T tower and bulkhead with Klien arms both front and back. The current tires were only used to test it down the street. Comments, concerns, suggestions are welcomed. Not sure how it'll do at the track, but I should know something next week, if we don't get anymore rain! Yucky. 
