Page 1 of 2
just a team graphite with stealth still running hard ......
Posted: Fri Feb 01, 2013 10:49 am
by protsi
hi there to all you rc freaks!
this is my old RC10 I bring it to live again with all the new tech hope you like it!
lipo 4000
brushless motor 10.5
esc 350 amp burst
new mip axle with boot cover
rpm rear carrier with b4 shaft to run new tires 2.2
rebuilt all shocks
new shock shaft frt gold ones
tc3 holding batteries nut with treat
rpm bumper frt
titanium turnbuckle
serpent tie rod end in steering
green spring frt
black spring rear
losi 2.2 x1.50 rear tire
proline frt tires 1.125x3.25 wide
rpm steering system
new transmission outdrive both sizes
trans rebuilt new bearings
new wing
this ting run like rocket even with the slipper clutch a little loose to allow some slip .
Re: just a team graphite with stealth still running hard ..
Posted: Fri Feb 01, 2013 11:12 am
by justinspeed79
Nice.
Re: just a team graphite with stealth still running hard ..
Posted: Fri Feb 01, 2013 7:21 pm
by raserx08
Looks good.
Re: just a team graphite with stealth still running hard ..
Posted: Sat Feb 02, 2013 10:13 am
by uniquenamehere
Welcome... it looks great... what body is that?
Post higher resolution pics too!
Re: just a team graphite with stealth still running hard ..
Posted: Sat Feb 02, 2013 10:41 am
by rctenracer
Nice set up and paint . Never seen that tread design before on the front prolines. Are they current or vintage?
Re: just a team graphite with stealth still running hard ..
Posted: Sat Feb 02, 2013 10:56 am
by THEYTOOKMYTHUMB
uniquenamehere wrote:what body is that?
Looks like a Viper
http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LX2708&P=7
Re: just a team graphite with stealth still running hard ..
Posted: Sat Feb 02, 2013 1:18 pm
by vintage AE
Yup Viper body for sure. Nice build!
Re: just a team graphite with stealth still running hard ..
Posted: Sat Feb 02, 2013 3:53 pm
by Flargen
Nice! Rebuilding one myself right now.
Mind snapping a pic of the front battery tray? Curious how you got your LiPo to fit.
Re: just a team graphite with stealth still running hard ..
Posted: Mon Feb 04, 2013 1:23 pm
by protsi
Really I don't have the name of the body.
about the fitting of the lipo is easy just cut the front part of the battery holder and you just holded with some treet nut like the one for TC3.
look the old wing frm ASSOCIATED
any other idea to share with my ... im planning to move to a JR racing servo
Re: just a team graphite with stealth still running hard ..
Posted: Mon Feb 04, 2013 1:35 pm
by kevin107
Lookin good!
Assuming the old transmission is handling the 10.5 ok?
Re: just a team graphite with stealth still running hard ..
Posted: Mon Feb 04, 2013 1:41 pm
by protsi
no problem whatsoever the trick is allow the clutch to spin a little bit and reprogram the ESC to have like 20% brake .. for me is enough brake.
Re: just a team graphite with stealth still running hard ..
Posted: Mon Feb 04, 2013 2:09 pm
by protsi
rctenracer wrote:Nice set up and paint . Never seen that tread design before on the front prolines. Are they current or vintage?
current
Re: just a team graphite with stealth still running hard ..
Posted: Mon Feb 04, 2013 2:39 pm
by askbob
Looks good! What front tires are those?
Re: just a team graphite with stealth still running hard ..
Posted: Mon Feb 04, 2013 3:41 pm
by protsi
the front tire are PROLINE
Re: just a team graphite with stealth still running hard ..
Posted: Mon Feb 04, 2013 3:44 pm
by askbob
protsi wrote:the front tire are PROLINE
Which model/part#/name of Pro-Line?