RC10Talk - The Net's Largest Vintage R/C Community

I got these alloy gear cases from Walt before.. After checking my rc10's I just noticed i don't even have the same gearboxes to swap out.. Lol..
maybe i should sell some of the rc10"s & find some right ones...

Sorry for the bad pics..



All the gearboxes i have are this type..

The alloy case is for a stealth transmission, you have a six gear. Doh!

You could get used stealth for the guts, or try to find the parts individually, then you can install it in place of your six gear. You will have to drill the chassis i if it isn't already.

Parts you'll need (via RC10 parts list):

• ASC6577 - outdrive hub, right
• ASC6578 - outdrive hub, left
• ASC6570 - idler gear
• ASC6580 - diff gear
• ASC3926 - TC3 diff rebuild kit (still available, Stealth-compatible). TH breakdown.
• ASC6581 - carbide diff balls, 3/32", 12 total
• 2x 3/8 x 5/8 plain bearings
• 4x 3/16 x 3/8 plain bearing
• 2x 5/32 x 5/16 plain bearings

You have the choice of 2 different topshafts: the original (ASC6571), which will let you use the original slipper assembly. The alternative is ASC9601, which will allow you to run the V2 or VTS slipper assemblies from the B4/B44 line. Details can be found here about the other parts needed for each option.

Beware that the outdrives are virtually non-existent these days... And thanks to yours truly, 2 suppliers are now permanently out-of-stock, as I bought their last ones for the aluminum transmission housing I ordered from Rogue Element (fresh transmission build). That's the only reason I have this parts list handy, lol.

Once I get mine, if you're still looking, I can sell you my old outdrives if you absolutely need them. I'd rate them as somewhere between fair and good condition. Your best option would be to keep an eye on eBay for a used Stealth though, honestly.

Thanks for the info.. That would help.

You can drill your chassis to make it fit though. RCcarbonworks.com has a template that they sell.

Oh yeah! I also meant to ask.

Where in the hell did you find those rear arm mounts?!

They were made by a member here named Atlas.

cooltoys wrote:I got these alloy gear cases from Walt before.. After checking my rc10's I just noticed i don't even have the same gearboxes to swap out.. Lol..
maybe i should sell some of the rc10"s & find some right ones...

Sorry for the bad pics..



All the gearboxes i have are this type..

i see whats wrong you need the plastic case
why dont you just send me the eye sore of a hunk of metal
and ill set you up with the one you need
farmer

farmer wrote:

cooltoys wrote:I got these alloy gear cases from Walt before.. After checking my rc10's I just noticed i don't even have the same gearboxes to swap out.. Lol..
maybe i should sell some of the rc10"s & find some right ones...

Sorry for the bad pics..



All the gearboxes i have are this type..

i see whats wrong you need the plastic case
why dont you just send me the eye sore of a hunk of metal
and ill set you up with the one you need
farmer

Thats a good idea...